In addition to the browser-based interface accessible via HTTP (port 80) and HTTPS (port 443), NetMRI supports a command line interface accessible via SSH (port 22). The Administrative Shell accepts a variety of commands that are useful for troubleshooting and maintenance.
...
autoupdate auto force-major
| Anchor | ||
|---|---|---|
|
...
|
...
|
...
run command
The benchmark showrun command displays the benchmark results for the NetMRI VM performance in terms of device count. executes the Infoblox Benchmark tool to test the hardware performance of your NetMRI VM.
Following is a sample output from this command:
netmrivm193> benchmark show
Benchmark results:
OC total capacity: 200
Collector/Standalone total capacity: 100
RAM capacity for OC: 500
RAM capacity for Collector/Standalone: 0
IO capacity for OC: 3800
IO capacity for Collector/Standalone: 3200
CPU capacity for OC: 0
CPU capacity for Collector/Standalone: 250
netmrivm193>SA-4-100> benchmark run
Do you want to run the benchmark on the next boot? (y or n): y
***************************************************************************
The benchmarking is a long-running process and can take up to 1 hour.
During this process system will respond only to pings, the CLI and UI
will be unavailable. Please be patient.
***************************************************************************
Do you want to reboot right now? (y or n): n
The benchmark tool will be launched on the next boot.
SA-4-100>
| Anchor | ||||
|---|---|---|---|---|
|
The benchmark show command displays the benchmark results for the NetMRI VM performance in terms of device count.
Following is a sample output from this command:
SA-4-100> benchmark show
Device Capacity (the benchmark was executed on 2020-03-09 03:07:47.939190)Current compatibility mode: Operations Center---------------------------+----------------------+------------------------Calculated Based On | Standalone/Collector | Operations Center---------------------------+----------------------+----+-------------------CPU (40 cores, 67883 MIPS) | 3650 | 18600Storage (30061 IOPS) | 5000+ | 20000+
RAM (205 Gb) | 5000+ | 20000+---------------------------+----------------------+------------------------Result | 3650 | 18600
| Anchor | ||||
|---|---|---|---|---|
|
| Anchor | ||||
|---|---|---|---|---|
|
...
| Note |
|---|
The NetMRI NT-1400 appliance is licensed as standalone even if the OC license is applied. For information about the NetMRI NT-1400 appliance, see Operations Center Appliances and Requirements. |
| Note |
|---|
For the Customer Name field, use only US-ASCII symbols. |
Example 1 Sample output when you continue to use an existing license
...
systemresets NetMRI to the factory default state, erasing all network database information, network database archive files, custom issue help files, ACL settings, user accounts, etc. After areset system, reconfigure NetMRI using instructions in the Infoblox Deployment Guide for NetMRI and Operations Center.resetadminresets the administrator password to admin.
...