...
Data collection is automatically suspended during maintenance. During this time, the NetMRI browser interface is also disabled, displaying only a status message indicating that maintenance is being performed.
When archiving completes at the end of each maintenance cycle, the NetMRI appliance reboots to restart all processes and then resumes data collection.
| Note | ||
|---|---|---|
| ||
Because NetMRI data collection and analysis is are automatically disabled during archiving and also restarts the appliance after archiving completes, the archive process should be performed during off-hours whenever possible. Weekly maintenance can take several hours to complete, depending on the size of the database. |
To configure weekly maintenance, do the following:
...
- Go to the Settings icon > Database Settings > Maintenance.
- In the Status menu, choose one of the following:
- Enabled: Enables weekly maintenance.
- Disabled: Disables weekly maintenance.
If you choose Disabled, go to step
- 6.
- Select a In the Day of Week menu, choose the day when you want to perform maintenance.
- Select an In the Hour to Start menu, choose the time when you want to perform maintenance.
- In the Archive Database menu, do choose one of the following:
- To disable Enabled: Enables database archiving during weekly maintenance, choose Disabled.To enable
- Disabled: Disables database archiving during weekly maintenance, choose Enabled.
- Click Update.