...
You can run the set temp_license CLI command to install additional software (feature) licenses that last for 60 days. Running the set temp_license command displays a list of that can be installed on TE-4106. Depending on the software that you want to use, choose the license. The appliance then displays a list of appliances that can run the software you chose. Depending on your requirement, choose the appliance to install on top of the base TE-4106 appliance.
You can run the set hardware-type IB-FLEX CLI command to set TE-4106 appliance as an IB-FLEX appliance.
The below figure depicts the list of software licenses displayed and the appliances that support these licenses. The appliances vary depending on the base model that you have purchased. The following figure represents the TE-4106 series of appliances:
...
The TE-4106 series of appliances is intended to replace the TE-4005 series of appliances.
...
The following table lists the software supported by the various appliances in the TE-4106 series.
Appliance | Supported Software |
|---|---|
TE-4126 | DNS, DHCP, Grid, DNS Traffic Control, DNS Forwarding, Cloud Platform, Advanced DNS Protection, Cloud Network Automation, DNS Cache Acceleration, Microsoft Management, Query redirection, Response Policy zone, Threat |
Insight, Multi-Grid Management | |
ND-4106 | Grid, Discovery |
TE-4015 | DNS, DHCP, Grid, DNS Traffic Control, DNS Forwarding, Cloud Platform, Advanced DNS Protection, Cloud Network Automation, DNS Cache Acceleration, Microsoft Management, Query redirection, Response Policy zone, Threat |
Insight | |
TE-4025 | |
ND-4005 | Grid, Discovery |
TR-5005 | Grid, Reporting |
| Note |
|---|
Note: In NIOS 9.0.2 if you install the Multi-Grid Management license on a TE-4126 appliance, any system configuration (for example, support_access, session_timeout, and so on) will be set to the default setting. |