Versions Compared

Old Version 8

changes.mady.by.user Gary Leicht

Saved on

compared with

New Version Current

changes.mady.by.user Gary Leicht

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Prerequisites for Deploying

...

Infoblox Endpoint on a Linux Client System

To install the Infoblox Infoblox BloxOne Linux client, one of the following Linux versions is required:

  • Ubuntu 22.x (OS VERSION=“22.04 LTS (Jammy Jellyfish)” and above)
  • Ubuntu 20.x
  • Red Hat 8.x

Limitations

BloxOne Endpoint Infoblox Endpoint for Linux is not compatible with VPNs.

Info
titleImportant

Manual Installation of Tray Icons 

Currently, due to the nature of the Linux Redhat’s extension handling, we ask our customers to install the tray icons enabling the extension for Gnome manually. The instructions are as follows:

1.Go to the site https://extensions.gnome.org/
2. Find the extension with the name “Tray Icons: Reloaded“.
3.  Install the extension and then enable it.
4. Now you can install Infoblox Endpoint.

Installing an Infoblox Endpoint Linux Client Application

To install Infoblox Endpoint on a Linux Client application, perform the following steps:

  1. Download the Linux BloxOne Linux Infoblox Endpoint zip file: Navigate to the downloads page by going to Configure > Administration > Downloads, and click Download Linux Endpoint Client.
    Image Removed
    Image Added
    Image: The Infoblox Endpoint download options available in the Administration section of the Infoblox Portal. 

  2. Unzip the downloaded file, and run the installer.sh file. Install BloxOne
  3. Install Infoblox Endpoint by using the command command sudo sh ./installer.sh.
  4. Verify that BloxOne that Infoblox Endpoint has been installed correctly: The BloxOne The Infoblox Endpoint icon will appear on your desktop, and all related files will be extracted to /usr/local/b1e.
    the BloxOne Endpoint iconImage Modified
  5. To check the status of BloxOne of Infoblox Endpoint, click the BloxOne the Infoblox Endpoint icon and open the Status tab.


    Image: The Infoblox Endpoint startus screen. 


  6. Verify that the system tray icon is visible and the status is Protected with active network.

Downloading and

...

Viewing Infoblox Endpoint Logs

To download and view BloxOne view Infoblox Endpoint logs, click the BloxOne the Infoblox Endpoint icon, open the Troubleshoot tab, and click Download Logs.


The BloxOne Endpoint download logs screen.Image Modified 
Image: The Infoblox Endpoint download logs screen.

Start/Stop

...

the Infoblox Endpoint Service on a Linux Client Application

  • To start the service, use the following command: 

...

     sudo systemctl stop b1endpointapp.service

...

Uninstalling Infoblox Endpoint from a Linux Client Application

Use the following command:

...

     sudo sh uinstall.sh

Manual Installation of Tray Items 

...

.

...

/unistall.sh