Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 3 Current »

As prerequisites, ensure that you have specified the vNIOS flavors and provided unique names for the instances you want to deploy.

Deploying a Standalone Instance

To deploy a standalone vNIOS instance in OpenStack, complete the following steps:

  1. Sign in to the system as a root user.

  2. Run the openstack port create command to create port IDs for the MGMT, LAN1 and HA network interfaces:
    openstack port create --network <network_name> --vnic-type direct --fixed-ip subnet=<subnet> ip-address=<ip_address> <mgmt/lan1/ha/lan2_port_name>
    Example:
    openstack port create --network hostonly-ens3f0 --vnic-type direct --fixed-ip subnet=b07c0390-7029-4c05-a506-df0c86cd5fae ip-address=10.36.162.11 mgmt1_port

    • For <port_name>, specify the port name according to the port you are creating.

    • For the vNIOS appliance to run in OpenStack, you must specify at least two networks, MGMT and LAN1.

    • If you need to create a LAN2 port, then you must create an HA port.

    • To set up high availability (HA) with vNIOS, you must specify three network interfaces, MGMT, LAN1, and HA on each node of the HA pair.

  3. Run the openstack port list command to view the network and port IDs generated for all network interfaces. You can copy the port IDs from this output to the openstack server create command.

  4. Deploy the instance using the openstack server create command as follows:

    • For Red Hat OpenStack Platform, use the command:
      openstack server create <instance_name> --flavor <flavor_name> --image <image_name> --nic port-id=<mgmt_port_id> --nic port-id=<lan1_port_id> --nic port-id=<ha_port_id> --nic port-id=<lan2_port_id>

    • For Ubuntu, use the command:
      openstack server create <instance_name> --flavor <flavor_name> --image <image_name> --network <network_name_mgmt> --network <network_name_lan1> --network <network_name_ha> --network <network_name_lan2>
      Note: If you are setting up HA, ensure that the LAN 1 and HA interfaces are in the same subnet.

      Parameter description:

      • flavor specifies the flavor of the vNIOS instance. For information about how to define flavors, see the Setting up vNIOS OpenStack Flavors section.

      • image defines the name of the image created in an earlier step. For information about supported vNIOS for OpenStack models, see vNIOS for OpenStack Virtual Appliance Models.

      • nic port-id specifies the port ID of an interface (MGMT, LAN1, LAN2, and/or HA).

      • network specifies the name of the network in which the port must reside.

The vNIOS instance automatically starts after the openstack server create command is run.

Note

To remove networks, use the openstack net-delete command. If some of the networks remain, remove them manually from OpenStack Horizon.

Deploying the vNIOS Instances in an HA Setup

To deploy the vNIOS instances in an HA setup in OpenStack, complete the following steps:

Note

In an HA configuration, you must unblock the VRRP port 112 in your security group.

  1. Sign in to the system and export appropriate OpenStack credentials.

  2. For each of the active and passive nodes, run the openstack port create command individually to create port IDs for the MGMT, LAN1 and HA network interfaces:

    openstack port create --network <mgmt/lan1/ha_network_name_node1> --vnic-type direct --fixed-ip subnet=<subnet> ip-address=<ip_address> <mgmt/lan1/ha_port_name_node1>

    openstack port create --network <mgmt/lan1/ha_network_name_node2> --vnic-type direct --fixed-ip subnet=<subnet> ip-address=<ip_address> <mgmt/lan1/ha_port_name_node2>

    • For <port_name>, specify the port name according to the port you are creating.

    • To deploy the vNIOS instance over RHOSP with SR-IOV enabled, specify vnic-type as direct.

  3. Create a port for HA-VIP in the same subnet as that of LAN1 by using the command:
    openstack port create --network <lan1_network_name> --vnic-type direct --fixed-ip subnet=<subnet> ip-address=<ip_address> <ha_vip_port_name>

  4. Run the openstack port list command to view the network and port IDs generated for all network interfaces. You can copy the port IDs from this output to the openstack server create command.

  5. Deploy active and passive nodes by using the openstack server create command for each node:

    • For Red Hat OpenStack Platform, use the command:
      openstack server create <instance_name> --flavor <flavor_name> --image <image_name> --nic port-id=<mgmt_port_id> --nic port-id=<lan1_port_id> --nic port-id=<ha_port_id>

    • For Ubuntu, use the command:
      openstack server create <instance_name> --flavor <flavor_name> --image <image_name> --network <network_name_mgmt> --network <network_name_lan1> --network <network_name_ha> --network <network_name_lan2>

      Parameter description:

      • flavor specifies the flavors of the vNIOS for OpenStack instance. For information about how to define flavors, see the Setting Up vNIOS OpenStack Flavors section.

      • image defines the name of the software package you downloaded. For information about supported vNIOS for OpenStack models, see vNIOS for OpenStack Virtual Appliance Models.

      • nic port-id specifies the port ID of the MGMT, LAN1, LAN2, or HA interface.

      • network specifies the name of the network in which the port must reside.

        The vNIOS for OpenStack instance automatically spins up after the command is run. You must set up the HA port of both nodes to form a bond with the HA interface. For instructions, see step 7 in the Configuring the vNIOS Instance.

  6. Proceed to configure the instances as explained in the Configuring the vNIOS Instance topic.

  • No labels