Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

The NIOS 8.6 release includes the following new features and enhancements:

Bypassing Subscriber Secure Policy for Allowed Lists (RFE-11652)

NIOS 8.6.3 introduces the Enable Subscriber Secure Policy Bypass for Allowed list and the Set Global Allow List RPZ index range ( 0 to 30) options in which subscriber specific allow domains take priority over category based policies (content-filtering), security policies and blocklist entries. Subscriber specific block domains take priority only over category-based policies (content-filtering).

The Enable Subscriber Secure Policy Bypass for Allowed list checkbox enables NIOS to generate a normal response for all domains in a subscriber’s allowed list. Allowed domains will override RPZ rules if any (for example, NXDOMAIN), and categorization policy rules for the subscriber. This enables subscribers to override all policies for a specific domain.
The Set Global Allow List RPZ index range ( 0 to 30) checkbox adds a domain to an RPZ specified as a passthru RPZ rule, and that domain is also added as a global allowed list. NIOS 8.6.3 also introduces a new report called Daily Report on Subscriber Information and DNS Queries matching with ABLs that displays the overall subscriber information and DNS domain queries that match the queried domains in the allow and block lists. For more information about these options, see the Scaling Subscriber Sites topic in the NIOS 8.6 online documentation.

Validating Certificates (SPTYRFE-52)

NIOS 8.6.3 introduces the Grid > Certificates > Validate Certificates option that validates all certificate uploaded using the Manage Certificates option and also validates DNS Traffic Control HTTPS health monitor certificates. It displays the certificates to be either valid, invalid, or expired. It displays warning messages for expired certificates and for certificates with no SKI (Subject Key Identifier). For more information, see the Validating Certificates topic in the NIOS 8.6 online documentation.

ZVELO Category Database Update Failure Changes (RFE-12140)

If a ZVELO category database update failure occurs for three consecutive days:

  • Grid Manager displays a yellow background with the "Please correct the download credentials or the proxy configuration to get the latest database updates" message and the member status is displayed as "Domain category db is not latest" in the Grid Manager > Subscriber Collection > Services > Service Status column.
  • A new SNMP trap is sent with the message "Domain category db is not latest". Additionally, if email notifications are configured, an email is sent to the configured email address with the "Domain category db is not latest" message.
  • Post this event, if the ZVELO download is successful, a new SNMP clear trap is sent, and an email with the “zvelo SNMP Clear Trap” message is also sent. The Service Status column has a green background and the “Subscriber service is working” message is displayed.

If a ZVELO category database update failure occurs for more than 60 days:

  • Grid Manager displays a red background with the "zvelo database expired. Subscriber secure queries will be fail-open." message and the member status is displayed as "zvelo db has expired" in the Grid Manager > Subscriber Collection > Services > Service Status column.
  • A new SNMP trap is sent with the "zvelo db has expired" message. Additionally, if email notifications are configured, an email is sent to the configured email address, with the "zvelo db has expired" message.
  • Post this event, if the zvelo download is successful, a new SNMP clear trap is sent, and an email with the “zvelo SNMP Clear Trap” message is also sent. The Service Status column has green background and the “Subscriber service is working” message is displayed.

Support for Network Insight on the AWS and Microsoft Azure Public Cloud (RFE-10248)

Starting from NIOS 8.6.3, deployment of Network Insight appliances on Microsoft Azure and AWS public cloud is supported. You can use the discovery feature to detect devices in your network and manage device data from Grid Manager.

Filtering Options for vDiscovery

Starting from NIOS 8.6.3, you can configure vDiscovery jobs with CIDR-based filters to limit vDiscovery only to configured networks or to skip vDiscovery from excluded networks. For more information, see the Configuring vDiscovery Jobs topic in the the NIOS 8.6 online documentation.

Infoblox BloxConnect Changes

From NIOS 8.6.3 onwards, the Infoblox BloxConnect screen that appears when you first log in to Grid Manager will no longer be displayed. To better enhance the NIOS customer experience and for Infoblox to proactively respond to customer issues in a timely manner, BloxConnect data will be collected by default and the same data will be included in the support bundle. For information about the data collected, see https://insights.infoblox.com/resources-datasheets/infoblox-datasheet-infoblox-bloxconnect.

Synchronizing Amazon Route 53 Data from Multiple AWS Accounts (RFE-9382)

vNIOS for AWS is integrated with Amazon Route 53. You can now discover and synchronize Amazon Route 53 DNS data from multiple AWS accounts of an AWS organization to NIOS using a single NIOS admin account. For more information, see the Amazon Route 53 topic in the Installation Guide for vNIOS for AWS at https://docs.infoblox.com.

Support for Route 53 Integration on AWS GOV Cloud (RFE-11806)

Starting from NIOS 8.6.3, the vNIOS for AWS Route 53 integration is supported on AWS GOVCloud. For more information, see the Amazon Route 53 topic in the Installation Guide for vNIOS for AWS at https://docs.infoblox.com.

Support for Amazon EC2 R6i Instance Type (RFE-12312)

vNIOS for AWS instances running on NIOS 8.6.3 or later can be deployed on Amazon EC2 R6i instance types. For information about supported EC2 shapes and models, see the Infoblox vNIOS for AWS AMI Shapes and Regions topic in the Installation Guide for vNIOS for AWS at https://docs.infoblox.com.

Connecting to the Serial Console of an Amazon EC2 Instance (RFE-11803)

You can now connect to the serial console of a vNIOS for AWS EC2 instance that is deployed on an R6i instance type for troubleshooting purposes. For more information, see the Provisioning vNIOS for AWS Using the BYOL Model topic in the Installation Guide for vNIOS for AWS at https://docs.infoblox.com.

Support for EBS Encryption (RFE-11931)

vNIOS for AWS instances running on NIOS 8.6.3 or later versions of 8.6.x, support encryption of Amazon Elastic Block Storage volumes. For more information, see the For more information, see the Provisioning vNIOS for AWS Using the BYOL Model topic in the Installation Guide for vNIOS for AWS at https://docs.infoblox.com.

Enabling the SHA1 Encryption Algorithm for the NTP Key (RFE-8178)

In NIOS 8.6.3, you can add the SHA1 NTP authentication key before enabling the NTP service on the Grid. The key is a 40 character hexadecimal string and it uses a hash-based symmetric encryption algorithm. For more information, see the Using NTP for Time Settings topic in the NIOS 8.6 online documentation.

Exporting to CSV Before Deleting a Network (RFE-11846)

NIOS 8.6.3 introduces the Export & Delete button that allows you to export the network data into a CSV file before deleting a network. For more information, see the Exporting and Deleting Networks section in the Configuring IPv4 Networks topic in the NIOS 8.6 online documentation.

Reconnecting Groups After a Grid Master Candidate Promotion (RFE-4753)

In NIOS 8.6.3, you can reconnect groups after a Grid Master Candidate promotion thus giving you more control over the promotion and minimizing service outages by allowing you to group Grid members and schedule a time for the groups to reconnect to the newly promoted Grid Master. As soon as the scheduled time arrives, members of Grid Master Candidate groups reconnect to the newly promoted master. You can do this by using the Activate GMC Group Promotion Schedule option in the GMC Group Promotion Schedule editor. For more information, see the Managing a Grid topic in the NIOS 8.6 online documentation.

Device Handling Performance Optimization for NIOS Subscriber Cache (RFE-12397)

Device handling performance optimization optimizes the use of NIOS subscriber cache by updating only the provisioned devices to NIOS thereby reducing the number of devices delivered to the NIOS cache. For more information, see the Device Handling Performance Optimization for NIOS Subscriber Cache section in the Infoblox Subscriber Insight and Subscriber Policy Enforcement topic in the NIOS 8.6 online documentation.

Improvements in Internal Cache Handling (RFE-12003)

Fast replication now does not take place for all subscriber site members; instead, it takes place from a single member with a full cache thus greatly improving cache handling.

Discovering Juniper Mist Devices

You can now discover Juniper Mist devices using Network Insight. For more information, see the Configuring Discovery for SDN and SD-WAN topic in the NIOS 8.6 online documentation.

SHA-512 and SHA-256 Support in Network Insight (RFE-12053)

Network Insight now supports the SHA-512 and SHA-256 algorithms for SNMP polling.

AES-256 Support for SNMPv3 Authentication (RFE-10304)

From NIOS 8.6.3 onwards, the AES-256 encryption is supported for SNMPv3 authentication in Network Insight.

Converting Real-Time Alerts to Scheduled Alerts (RFE-12594)

In NIOS 8.6.3, alert types in NIOS Reporting for the new device discovery alert, security alert, and category alert have been converted from Real-time” to “Scheduled.

Enhancements in the DNS Object Count Trend and FLEX Grid Licensing Features Enabled Reports (RFE-11909)

In NIOS 8.6.3, certain changes have been implemented to the following reports:

  • Managed DDI features enabled
  • SPLA Grid Licensing Features Enabled
  • Managed DDI Peak IP Usage Trend
  • Managed Trend DNS Peak Usage
  • DNS Effective Peak Usage Trend for SPLA Grid License

Changes to these reports include:

  • All of these reports now also support non -IB-FLEX appliances.
  • All of these reports have the Members” and the “Reporting SPLA filters.
  • If you want to include a Grid member that does not have an extensible attribute in these reports, you must set the Reporting SPLA extensible attribute to Managed IB-FLEX’ or ‘Managed HW/SW depending on the Grid member type, and the Grid license must be flex_grid_ms.

Support for Microsoft Server 2022 (RFE-12246)

NIOS 8.6.3 supports Microsoft Server 2022.

Support for VMware ESXi 7.0.x (RFE-12555)

vNIOS for VMware is now supported on VMware ESX or ESXi versions 7.0.2 and 7.0.3.

Support for Nutanix AOS 6.x LTS (RFE-12650)

vNIOS for Nutanix™ AHV is now supported on NIOS 8.6.3, NIOS 8.6.2, and NIOS 8.5.5. For more information, see the Infoblox Installation Guide vNIOS for Nutanix AHV at https://docs.infoblox.com.

IB-FLEX Support for Nutanix AHV (RFE-12601)

vNIOS for Nutanix™ AHV is now supported on IB-FLEX appliances. For more information, see the Infoblox Installation Guide vNIOS for Nutanix AHV at https://docs.infoblox.com.

Virtual Advanced DNS Protection Software and Virtual DNS Cache Acceleration Support in vNIOS for Nutanix (RFE-12615)

vNIOS for Nutanix now supports virtual Advanced DNS Protection Software (vADP).

DHCP, IPv6, and HA Support in vNIOS for Red Hat OpenShift (RFE-12835)

vNIOS for Red Hat OpenShift can now manage DHCP, IPv6, and HA configurations. For more information, see the Infoblox Installation Guide vNIOS for Red Hat OpenShift at https://docs.infoblox.com.

Support for Upgraded Splunk Version 8.2.10

NIOS 8.6.3 supports Splunk version 8.2.10.

NIOS Enhancements to Support Consolidated Hotfixes

NIOS 8.6.3 introduces new enhancements to the implementation of hotfixes. NIOS 8.6.3 introduces the manifest file that is generated after the hotfix is successfully applied. The manifest file contains key details such as affected files, RPMs installed, and the best suggested action to activate changes. NIOS 8.6.3 also introduces CLI support to view the best suggested action to activate hotfix changes in the Grid member and to support the download of manifest files using WAPI and support bundles.

Enabling and Disabling DNS Traffic Control Objects (RFE-7088)

NIOS 8.6.2 introduces the Enable Traffic Management Objects and the Disable Traffic Management Objects screens using which you can enable or disable individual DNS Traffic Control objects. You can also disable the health monitoring of a particular object to stop performing health checks. You can access the new screens from the Traffic Control panel on the Data Management > DNS > Traffic Control tab. For more information about enabling and disabling DNS Traffic Control objects, see the Managing DNS Traffic Control Objects.

Multi-Master DNS Failover for DDNS (RFE-5514)

In NIOS 8.6.2, if you have configured more than one Grid DNS primary server for DDNS updates for multi-master zones, DHCP servers use the first available DNS primary server that is configured. If the first DNS primary server is not reachable or is offline, then the DHCP servers reach for the next DNS primary server in the preferred multi-domain DDNS list and so on. You can add upto a maximum of three DNS primary nameservers for each zone.

Configuring Microsoft Servers and Delegated Name Servers (RFE-10168)

From NIOS 8.6.2 onwards, you will not be able to add a delegated name server group only if DNS synchronization is enabled on any Microsoft server configured in NIOS. You also cannot enable DNS synchronization for Microsoft servers in NIOS if delegated name servers are configured on them.

Support for Upgraded Splunk Version 8.2.4

NIOS 8.6.2 supports Splunk version 8.2.4.

vNIOS for Azure and vNIOS for AWS Support in IB-V5005 (RFE-7962)

IB-V5005 support is now extended to vNIOS for Azure and vNIOS for AWS. For detailed information see the Infoblox Installation Guide for vNIOS for AWS and the Installation Guide for vNIOS for Microsoft Azure available at docs.infoblox.com.

vNIOS for GCP Support in IB-V4015 and IB-V4025 (RFE-11349)

IB-V015 and IB-V4025 now support vNIOS for GCP. For detailed information see the Infoblox Installation Guide for vNIOS for GCP at docs.infoblox.com.

DHCP Support on vNIOS for GCP (RFE-9945)

vNIOS for GCP instances running on NIOS 8.6.2 offer DHCP services for on-premise networks. For more information see the Infoblox Installation Guide for vNIOS for GCP at docs.infoblox.com.

vNIOS for Nutanix AHV 5.20.3 (RFE-11997)

NIOS 8.6.2 supports the deployment of vNIOS on Nutanix AHV 5.20.3. For more details, see the Infoblox Installation Guide vNIOS for Nutanix AHV at docs.infoblox.com.

Enabling and Disabling BFD Internal DNS Monitoring (SPTYRFE-49)

NIOS 8.6.2 introduces a new checkbox called BFD Internal DNS Monitoring in the Grid Member Properties editor > Anycast tab. Selecting this checkbox enables the internal DNS monitor to send and receive DNS responses and to retract the OSPF or BGP route if it does not receive a DNS response.

You can enable or disable the BFD Internal DNS Monitoring checkbox only if you select the Enable BFD checkbox. When you enable the BFD Internal DNS Monitoring checkbox, you have the option to toggle between enabling or disabling the internal DNS monitor. When you select this checkbox, Infoblox recommends that you also select the Enable DNS Health Check checkbox in the Grid Properties Editor or the Member Properties Editor. The BFD Internal DNS Monitoring checkbox is enabled by default. For more information see the About BFD.

Support for Cisco ISE Integration Through Outbound Endpoint

NIOS 8.6.2 supports Cisco ISE versions 3.0 and 3.1. Infoblox recommends that you configure Cisco ISE 3.0 and 3.1 using the Outbound Endpoint tab. Cisco ISE version 3.1 (pxGrid 2.0) is supported only through the Cisco outbound endpoint. For more information see the Configuring Outbound Endpoints.

Enforcing the Global Proxy List

In NIOS 8.6.2, if you want to proxy the traffic through the MSP (Multi-Services Proxy) server and have categorized the queried domains in the incoming traffic to the global proxy list, then the query resolves to an MSP virtual IP address and NIOS generates a synthetic resolution.  For more information, see the Scaling Subscriber Sites.

New DNSKEY Algorithm (RFE-6068 and RFE-9845)

You can now add the ECDSAP/SHA-256 and ECDSAP/SHA-384 cryptographic algorithms which the Grid Master can use when it generates the Key-Signing Key Rollover (KSK) and Zone-Signing Key Rollover (ZSK).

Extensible Attribute-based Topology Rulesets (RFE-9107 and RFE-11133)

You can now specify IPAM objects types, network containers, networks, ranges, and hosts and their External Attribute (EA) values in the Extensible Attributes Source Types for Topology Rules field to be used as source types when defining DNS Traffic Control topology rules. For more information, see the Configuring DNS Traffic Control Properties. 

vNIOS Support for Microsoft Azure Stack Hub (RFE-8303)

You can now deploy the NIOS virtual appliance on Microsoft Azure Stack Hub. vNIOS for Microsoft Azure Stack Hub which is a hybrid cloud platform that enables a vNIOS appliance to deliver Azure services in an on-prem environment. You can deploy vNIOS for Azure Stack Hub instances from the Azure CLI or the Azure Stack Hub portal. For more information, see the vNIOS Infoblox Installation Guide for Microsoft Azure at docs.infoblox.com.

Health Status of DNS Traffic Control Objects in API Responses (RFE-9893)

The Grid Master Candidate now provides the health status of DNS Traffic Control objects such as servers, pools, and LBDNs through WAPI requests.

Regenerating the Anycast Password (RFE-11117)

This release of NIOS introduces the set regenerate_anycast_password command that regenerates the anycast service password. The regenerated 8-character alphanumeric password is saved to the NIOS database and is used across all anycast configuration files (ospf.conf/bgp.conf/bfd.conf) for the following CLI commands: show ospf, show bgp, show ipv6_ospf, show ipv6_bgp, show bfd. 

This command is a maintenance mode command and has no arguments. Only superusers can execute this command. The value of password and enable password in the output of the configuration file commands such as show bfd are encrypted when you run the command. For more information, see the set regenerate_anycast_password.

Viewing Lightweight Access Point Details in Network Insight (RFE-9556)

You can now view the discovered lightweight access points on the Data Management > Devices page. The table displays the following information about the discovered lightweight access points: their name, IP address, device type, model, vendor, and device version. You can also view the discovery statuses and other information in the Discovery Status table (Data Management > Devices > Discovery Status).

Displaying the Lead Secondary Column in Name Server Group (RFE-2804)

You can now determine which member is configured as a lead secondary by adding in a column to the Authoritative Zone > Name Servers tab.

Support for creation_time for Host Records (RFE-8509)

NIOS 8.6.1 introduces the option of adding, updating, listing tthe creation timestamp value of DNS and non-DNS host records using Grid Manager and WAPI.

Support for IB-V4015 on Red Hat OpenShift (RFE-11545)

Red Hat OpenShift is now supported on IB-V4015 virtual appliance. For more information, see the Infoblox Installation Guide vNIOS for Red Hat OpenShift at docs.infoblox.com.

New Port Placements for the Infoblox 2205 and Infoblox 4005 Series Appliances

The front panels of the Infoblox 2205 Series and the Infoblox 4005 Series have been modified to have slots for the four ports (LAN2, HA, LAN1, MGMT) at the right. However, the Infoblox 2205 and Infoblox 4005 Series models that have the ports located at the center are also being shipped. There is no difference in software functionality between the models that have ports on the right and those that have ports in the center. Both the models will support NIOS versions prior to 8.5.4 and earlier.

For a visual representation of these models, see the Infoblox Installation Guide for 2205 Series Appliances and the Infoblox Installation Guide for 4005 Series Appliances documentation at https://docs.infoblox.com

ACL Support for the Last Queried Time in DNS Scavenging (RFE-7933)

You can now create an ACL or ACE for the Last Queried Time field in DNS scavenging and thus prevent a specified set of ACLs or ACEs from updating the last queried timestamp. A new GUI field called Prevent the following ACLs or ACEs from updating the last queried timestamp in the Grid DNS Properties > DNS Scavenging > Basic tab has been introduced. The set of ACL or ACEs can include IPv4 and IPv6 addresses and networks. For more information, see DNS Record Scavenging.

New Load Balancer to Add Persistence (RFE-6827)

You now have a new load balancing method called Source IP Hash to configure DNS Traffic Control pools. In this method, requests are distributed based on the hash value of an IP address from an incoming query and the health status of the pool or server. Here, clients have their own pool or server and are always associated with the same pool or server for the same query as long as the pool or server is green. If the health status of the pool or server turns red, NIOS switches the clients to the working pool or server and switches back when the health restores to green. For more information, see Load Balancing Methods for DNS Traffic Control.

New DNS Responses When No DNS Traffic Control Responses are Available (RFE-10212)

You now have the option to allow NIOS to either drop LBDN queries, or return DNS responses, or not return DNS responses when DNS Traffic Control responses are not available. Two new options have been introduced in the Data Management > DNS > Grid DNS Properties/Member DNS Properties > Traffic Control tab:

  • Drop LBDN matched DNS queries during full health update: this option drops all LBDN queries when the DNS service is waiting to receive a full health status update.
  • No specific behavior: this option does not return DNS responses when DNS Traffic Control responses are not available.

These options are in addition to the existing Return DNS response if there are no DNS Traffic Control responses available option which is selected by default. For more information, see the Configuring DNS Traffic Control Properties.

Consolidated Health Checking for DNS Traffic Control Grid Members (RFE-9427)

You can now choose the Grid members that must monitor health and share the health status. You can also select with which other members the health status is to be shared. You can do this by enabling or disabling the new Full Health Communication checkbox on the Data Management > DNS > Traffic Control > Health Monitors > Advanced tab. For more information, see the Configuring DTC Monitors for Health Check.

Notification Rule Enhancements

NIOS now includes the Delete operation type in the Outbound notification rules. The Delete operation type has been included for the DB Change DNS Record, DB Change DNS Zone, and Object Change Discovery Data event types. For more information, see the Configuring Notification Rules.

IP Address in DHCP address conflict notification (RFE-5170)

NIOS now displays the conflicting IP address along with the conflict category when an email notification is sent in case of an IPAM IP address conflict.

The content of the IB-TRAP-MIB::ibTrapDesc.0 SNMP trap is updated to STRING: DHCP address conflicts with an existing host address. [IP address].

New Cluster Logout Event in the Syslog File (RFE-9840)

The syslog file now contains a cluster logout message to easily identify between network-related disconnects and distribution-related logouts in real time. The message is in the following format: <date:time> daemon infoblox.localdomain INFOBLOX-Grid[]: notice Cluster logout for node <node_name>, for node clean restart. 

WAPI Performance Optimization (RFE-9986)

The performance of the WAPI GET method has been optimized for SRV, CNAME, and DNAME records.

Grid Backup Details in the Audit Log (RFE-9614)

The audit log file now logs information about who started the database backup and where the database backup file is stored. For more information, see the Audit Log.

New CLI Command to Set DNS and Anycast Start and Restart (RFE-10176)

This release of NIOS introduces the following commands:

  • set restart_anycast_with_dns_restart: sets DNS and anycast start and restart sequences. This command brings down the anycast service during the DNS restart or stops and redirects the traffic on the IP address of anycast to another site. You can use this command only on Grid Master. 
  • show restart_anycast_with_dns_restart: displays the status of the set restart_anycast_with_dns_restart command.

For more information about these commands, see the set restart_anycast_with_dns_restart and show restart_anycast_with_dns_restart topics.

Hybrid HA Support

In NIOS 8.6, an HA setup can comprise a physical appliance and a virtual appliance. This setup is called a hybrid HA setup. For information about hybrid HA and its limitations, see the About HA Pairs.

Single Network Interface of vNIOS for GCP (RFE-9995 and RFE-9807)

This release of NIOS introduces an option to deploy vNIOS for GCP as a single network interface instance using VPC (Virtual Private Cloud) and shared VPC networks on GCP. This instance provides core network services such as DNS and IPAM services on a modular Infoblox solution. For more information, see the online Installation Guide for vNIOS for GCP at https://infoblox-docs.atlassian.net/wiki/display/ILP/Appliances.

Resolving CNAME and DNAME Chains in A and AAAA Alias Records (RFE-9129)

NIOS now follows CNAME and DNAME chains if they appear as a target of an A or AAAA alias record and returns the RDATA in the final link of the CNAME and DNAME chain as the answer. The chain itself will not be present as part of the answer.

Resetting SNMP and CLI Credentials in Network Insight (SPTYRFE-97)

If SNMP or CLI credentials become obsolete for devices polled by Network Insight, this release of NIOS introduces the following new CLI commands to reset the credentials for all affected devices at once:

  • reset snmp: clears obsolete SNMP credentials (community strings) of devices polled by Network Insight.
  • reset cli: clears obsolete CLI credentials (community strings) of devices polled by Network Insight.

After clearing obsolete credentials, Network Insight reguesses the credentials for each device. For information about these commands, see the reset snmp and reset cli topics.

Credential Grouping for Discovery Devices in Network Insight

In Network Insight, you can now group credentials and assign them to devices based on their group. You can do this for devices globally, for probe members, or for individual devices. 

Credentials apply to devices at the following levels:

  • Grid Manager: settings apply across the Grid and all probe appliances licensed for discovery.
  • Discovery probe appliances: you can use inherited Grid settings or override them.
  • Individual devices: you can use inherited Grid or probe settings or override them with device-specific settings.

For more information, see the Configuring Discovery Properties.

Microsoft Server 2022 Support (RFE-12246)

NIOS 8.6 is supported on Microsoft Server 2022.

Discovery of Cisco Viptela SDN and SD-WAN devices

You can now discover SDN and SD-WAN devices from Cisco Viptela on-premise or cloud infrastructure using Network Insight. For more information, see the Configuring Discovery Properties.

Adjustable Support Bundle Download Timeout

You can override the default timeout value for support bundle download by a custom value. For more information, see the Downloading Support Bundles.

Support for New Vendors Using Advisor

A few more new vendors can use the Advisor service to monitor their device lifecycle and vulnerabilities. For more information, see the Monitoring Device Lifecycle and Vulnerabilities Using Advisor.

Display of Source Device for Discovered Networks

You can now view the device on which a network is discovered by Network Insight. For more information, see the Viewing Network Inventory.

Unbound Upgrade

The Unbound version has been upgraded to 1.10.1.

Enabling DDNS Updates from IPv6-Only DHCP Members (RFE-5118)

You can now enable DDNS updates from IPv6-only DHCP members.

DHCP Fingerprint Updates

NIOS now contains new and updated DHCP fingerprints and the fingerprint configuration file has been upgraded to version 10. For details about the fingerprint format, see the DHCP Fingerprint Detection.

 



  • No labels