Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

Version 1 Next »

Note: Before changing the power supply, make sure that it is securely cabled. An apparently failed power supply may simply be improperly connected to its power source.

You can order a second power supply to activate a redundant 1+1 configuration, as shown in the following Figure 18. In redundant configuration, power supplies are "hot-swappable," allowing removal or replacement of one power supply without interrupting appliance operation and network services.
Redundant power supplies share the power load. If one power supply fails, the other automatically assumes the full load and the appliance sends a system alarm. This configuration minimizes the chance of system failure due to failure of an individual power supply.
When a power supply fails for any reason, the Grid Manager displays a power supply alarm. The Grid Status widget on the Dashboard of the Grid Manager also displays an error. The appliance sends an email notification and reports an SNMP trap. The following Figure 18 illustrates the replacement process for an AC power supply.

Each power supply weighs about one pound (0.454 kg). The faceplate of each power supply contains a power LED and a dedicated power outlet.

To replace an Infoblox TE-1506 series AC power supply, do the following:

  1. Disconnect the AC power cable from the power outlet.

  2. Turn the thumbscrew counter-clockwise to release the power supply.

  3. Gently press the catch-release lever toward the thumbscrew, grip the power supply handle, and pull the power supply unit out of the chassis as illustrated in the figure above.

  4. Place the replacement power supply into the bay and push it forward until it is fully seated in the chassis. The catch-release lever will gently click into place.

  5. Reconnect the power cable.

  6. If the power supply is fully seated, powered on, and operating properly, the LED glows steady green.

  • No labels