In the TE-4106 series, TE-4106 is the base model upon which you can install the other appliances in the TE-4106 series. Your TE-4106 appliance comes configured out-of-the-box with a set of licenses. However, these licenses are temporary and will last for 60 days.

You can run the set license CLI command to install subscription licenses. When you run the set license command, you will be prompted to enter a license string. Contact Infoblox Support to obtain the license string and to go through the configuration process.

You can run the set temp_license CLI command to install additional software (feature) licenses that last for 60 days. Running the set temp_license command displays a list of that can be installed on TE-4106. Depending on the software that you want to use, choose the license. The appliance then displays a list of appliances that can run the software you chose. Depending on your requirement, choose the appliance to install on top of the base TE-4106 appliance.

The below figure depicts the list of software licenses displayed and the appliances that support these licenses. The appliances vary depending on the base model that you have purchased. The following figure represents the TE-4106 series of appliances:

The TE-4106 series of appliances is intended to replace the TE-4005 series of appliances.

Key Features

Key features of the TE-4106 series of appliances include:

• 30% increase in DNS QPS performance compared to TE-4015 and TE-4025.

• 30% increase in DHCP LPS performance compared to TE-4015 and TE-4025.

• The TE-4106 series of appliances run on NIOS 9.0.1 and later.

TE-4106 Hardware Appliances

The Infoblox Trinzic 4106 series comprises the following hardware appliance models:

• TE-4106

TE-4106 Software Appliances

The Infoblox Trinzic 4106 series comprises the following software appliance models:

• TE-4126

• ND-4106

• TR-5005

In addition to the aforementioned appliances, the Infoblox Trinzic 4106 series also supports the following Trinzic X5 series appliances: 

• TE-4015

• TE-4025

• ND-4005

If you are a NIOS 9.0 customer who has upgraded to NIOS 9.0.1, you can purchase the TE-4106 appliance and continue using the features supported by the appliances above without having to buy a new subscription license. NIOS has the ability to compare the existing licenses with the new ones that will be applied, validate them, and then report whether the licenses are valid or not. You can buy a new license after your existing license expires. However, you need a new license key. Contact Infoblox Support to obtain the new license key.

Supported Software

The following table lists the software supported by the various appliances in the TE-4106 series.