set regenerate_anycast_password
The set regenerate_anycast_password
 command regenerates eight-character alphanumeric password for the anycast service and saves it to the NIOS database. The password can then be used across all anycast configuration files (ospf.conf, bgp.conf, bfd.conf) with the following CLI commands:
- show ospfÂ
- show bgpÂ
- show ipv6_ospfÂ
- show ipv6_bgpÂ
- show bfdÂ
When these commands are executed with the configuration argument, the values of the password and enable password fields are shown encrypted. Running set regenerate_anycast_password
 restarts the anycast service on the Grid members that have the anycast service enabled. For information on OSPF commands, see show ospf and show ipv6_ospf. For information on BGP commands, see show bgp and show ipv6_bgp. For information on bfd command, see show bfd. Â
Note
Only superusers can use set regenerate_anycast_password
 in maintenance mode.
Syntax
set regenerate_anycast_password
This command has no arguments.Â
Example
Maintenance Mode > set regenerate_anycast_password
Resetting the password will restart the anycast service.
Do you want to proceed? (y or n):y
Are you sure? (y or n):y
Anycast password generation is successful.