Verifying the Registered Data Connector

If you have configured the NIOS Reporting Server as a destination in a traffic flow, you can log in to Grid Manager to verify the registered Data Connector VM after you configure and register the Data Connector VM with the Grid.

To verify the Data Connector VM, perform the following:

1. Log in to Grid Manager.
2. Navigate to the Grid tab -> Grid Manager tab, and then click Data Connector from the Toolbar.
3. In the Data Connector editor, you can view the details of the registered Data Connector VM in the Data Connector Cluster tab, as shown in Figure 1.3. For more information, see Viewing Registered Data Connector Details.

Figure 1.3 Data Connector editor in the Grid Tab