Synchronizing Between NetMRI and NIOS Appliances
- Viktoryia Varapayeva (Deactivated)
Prerequisite: make sure that you added and configured an IPAM synchronization as described in the previous section.
To run a synchronization between NetMRI and a NIOS appliance, complete the following:
- In Settings > Setup > NIOS IPAM Sync, select Sync in the Actions column for the required sync configuration.Â
- Click Yes to confirm.
The CSV import of discovered data to NIOS is performed. The IPv4 and IPv6 networks are added to the NIOS appliance database.
Open the NIOS GUI and verify that all the data are imported into NIOS.
The following table lists the data fields in the CSV file used for IPAM Sync:
Data Field in IPAM Sync Export File | NetMRI Model->Attribute | Field Description |
|---|---|---|
| General Device Data | ||
| discovered_name | Device -> DeviceName | DNS name of the IP address. |
| ip_address | Device ->Â DeviceIPDotted | A valid IPv4 address. Required. |
mac_address | Device -> DeviceMAC | A valid mac address. Must be lowercase. Optional. |
last_discovered_timestamp | Device -> DeviceTimestamp | Timestamp of last time the discoverer has seen the device. A UTC timestamp. Required. |
first_discovered_timestamp | Device -> DeviceFirstOccurrence | Timestamp of the first time the discoverer has seen the device. A UTC timestamp. Optional. |
netbios_name | N/A | The NetBIOS name of device. String type. Maximum size is 15 characters. Optional. |
os | Device -> DeviceVersion | The OS of the IP address. String Type. Maximum size is 256 characters. Optional. |
| device_model | Device -> DeviceModel | The model of device. |
| device_vendor | Device -> DeviceVendor | The vendor of device. |
| device_location | Device -> DeviceSysLocation | The location of device. |
| device_contact | Device ->Â DeviceSysContact | The contact of device. |
| oui | Device ->Â DeviceOUI | The OUI of device. |
| discoverer | N/A | Always "NetMRI". |
| Attached Device Data (only for endhosts) | ||
network_component_type | Device -> DeviceType | The type of component connected to the IP address. Eg Switch, Router, Other. Optional. String type. Max size 32. |
network_component_name | Device -> DeviceName | Name of component connected to the IP address. Optional. String type. Max size 64. |
network_component_ description | Device -> DeviceSysDesc | Description of component connected to the IP address. Optional. String type. Max size 256. |
network_component_ip | Device -> DeviceIPDotted | IP address of component connected to the IP address. Optional. String type. IPv4 address format. |
| network_component_model | Device -> DeviceModel | The model of component connected to the IP address. |
| network_component_vendor | Device -> DeviceVendor | Vendor of component connected to the IP address. |
| network_component_location | Device -> DeviceSysLocation | Type of component connected to the IP address. |
| network_component_contact | Device ->Â DeviceSysContact | Contact of component connected to the IP address. |
network_component_port_ number | Interface ->Â SwitchPortNumber | Port number on the component connected to the IP address. Optional. Unsigned integer type. Range 0 - 9999. |
network_component_port_ name | Interface ->Â ifName | Port name on the component connected to the IP address. Optional. String type. Max size 64. |
network_component_port _description | Interface ->Â ifDescr | Description of the Port on the component connected to the IP address. Optional. String type. Max size 256. |
| Port Data | ||
port_vlan_name | Vlan -> VlanName | Name of the Vlan on the Port. Optional. String type. Max size 64. |
port_vlan_number | Vlan -> VlanIndex | Port Vlan Number. Optional. Unsigned integer type. Range 0 - 9999. |
port_speed | Interface -> ifSpeed | Speed settings on the switch port. Optional. String type. Valid values are 10M, 100M, 1G, 10G, 100G, and Unknown. |
port_duplex | Interface -> ifDuplex | Duplex settings on the switch port. Optional. String type. Valid values are Full and Half. |
port_status | Interface -> ifAdminStatus | Administratively up or down. Optional. String type. Valid values are Up, Down, and Unknown. |
port_link_status | Interface -> ifAdminStatus | Connected or not. Optional. String type. Valid values are: Connected, Not Connected, and Unknown. |
| Cisco ACI Data | ||
| tenant | N/A | ACI tenant. |
| bridge_domain | N/A | ACI bridge domain. |
| endpoint_groups | N/A | ACI endpoint groups. |
| VRF and BGP Data | ||
| vrf_name | Interface ->Â vrf_name | VRF name of the IP address. |
| vrf_description | Interface ->Â vrf_description | VRF description of the IP address. |
| vrf_rd | Interface ->Â vrf_rd | VRF route distinguisher of the IP address. |
| bgp_as | N/A | BGP autonomous system number of device. |
| Wireless Access Point Data | ||
| ap_name | N/A | Name of wireless access point. |
| ap_ip_address | N/A | IP address of wireless access point. |
| ap_ssid | N/A | SSID of wireless access point. |