Adding Device Attributes to a Rule Filter

A device attribute is any characteristic of a discovered device that is readable by NetMRI. You can select attributes for addition to a filter through the Rule Logic Builder. Attributes that can be used for rules filtering include the following:

`Assurance`	The assurance level of the device type value (Router, Switch-Router, etc...)
`Community`	An SNMP community string.
`DNS Name`	The qualified DNS hostname for the device
`First Occurrence`	The date/time that this device was first seen on the network.
`Group`	The array of Device Groups to which the device belongs.
`ID`	The Device ID of the management server for the device.
`IP Address`	The management IP address of the device, in dotted (or colon-delimited for IPv6) format.
`Network View`	The network view assigned to the device through NetMRI.
`Model`	The discovered vendor's device model name.
`Name`	The NetMRI name of the device; this will be either the same as DeviceSysName or DeviceDNSName, depending on your NetMRI configuration.
`Rank`	The device group ranking level associated to the device as determined by NetMRI after discovery
`Reboot Time`	The date/time this device was last rebooted.
`SAA Version`	The SAA version running on this device. Used for Cisco VoIP support.
`Sys Description`	The device sysDescr as reported by SNMP.
`Sys Name`	Device system name as reported through SNMP.
`Vendor`	The device vendor name.
`Version`	The device OS version.