The show bfd details command displays the detailed BFD session details. For information about how to set the logging level, see set bfd.

Syntax

show bfd details

This command has no arguments.

Example

Infoblox > show bfd details
OutAddr             NeighAddr         LD/RD           Holdown(mult)        State     Int 10.34.54.68        10.34.54.16        2/4               300(3)               Up     bond0
Local Diag: 0, Demand mode: 0, Poll bit: 0
MinTxInt: 100000, MinRxInt: 100000, Multiplier: 3
Received MinRxInt: 100000, Received Multiplier: 3
Holdown (hits): 300(0), Hello (hits): 100(1638) Authentication:None
                 Last Sequence Number: Rx: 0, Tx: 1566182577 Rx Count: 1638
Tx Count: 1686
Last packet: Version: 1                 - Diagnostic: 0              State bit: Up              - Demand bit: 0
             Poll bit: 0                - Final bit: 0
             Multiplier: 3              - Length: 24
             My Discr: 2       - Your Discr: 4
Min tx interval: 100000- Min rx interval: 100000 Min Echo interval: 100000

Browser not supported