Use the show dnstap-status command to view the status of the dnstap configuration. The CLI displays the status of the all the fields in the Toggle Advanced Mode > Logging tab. To enable or disable the dnstap status use the set enable_dnstap command.

Syntax

show dnstap-status

Example

Infoblox > show dnstap-statusDNSTAP is onDNSTAP configuration overridden on a Member level.Enable forwarding queries category of log messages using DNSTAP: Yes
Enable forwarding DNS responses category of log messages using DNSTAP: No
IP address of DNSTAP receiver to transfer captured DNS queries/responses: 7.29.121.1
DNSTAP receiver port number: 7000

Browser not supported