The set smartnic monitor-mode command enables and disables monitor mode for the Threat Protection service. This is disabled by default. When monitor mode is enabled, the appliance logs DNS packets (instead of dropping them) that would have been blocked by threat protection rules. This information is recorded in the audit log. Note that you can enable or disable monitor mode only for individual members. You cannot set this configuration at the Grid level.
To view whether monitor mode is enabled or disabled for the Threat Protection service, see show smartnic.

Syntax

set smartnic monitor-mode {on|off}

Argument	Description
`on`	Enables monitor mode for the Threat Protection service.
`off`	Disables monitor mode for the Threat Protection service.

Examples

Enable debugging

Infoblox > set smartnic monitor-mode on

Disable debugging

Infoblox > set smartnic monitor-mode off

Browser not supported