In addition to viewing the discovered data, you can perform the following to manage the discovered data:

• Manage an unmanaged address by adding it to a host, converting it to managed data, or clearing its unmanaged status. Note that for Cloud Network Automation, you can convert discovered data to NIOS objects within a delegated scope.

• Resolve conflicting addresses.

• Clear discovered data for a network view, network, IP address, or cloud tenant.

• You can also clear all discovered data collected by a specified vDiscovery job.

This section covers the following:

Managing Unmanaged Data

You can manage unused and unmanaged addresses by performing one of the following:

• Add to an existing host, as described in Adding to an Existing Host below.

• Convert to a fixed address, host, A record, or PTR record, as described in Converting Unmanaged Data below. Note that for Cloud Network Automation, you can convert discovered data to NIOS objects within a delegated scope.

• Clear the unmanaged status, as described in Clearing Unmanaged Data below.

Adding to an Existing Host

You can add an unmanaged address, including all its information, to an existing host. You can select the desired host to which you want to add the unmanaged address.
To add an unmanaged address to an existing host, perform the following:

1. From the IP Map or List panel, select an unmanaged address you want to add to a host, and then click Add -> Add to Existing Host from the Toolbar.

2. In the Select Host dialog box, select a host from the table. You can also search for a host using filters or the Go to function. For information Using filters and Using the go to Function , see Finding and Restoring Data. Click the Select icon to select the desired host.
   Note that depending on the page size configuration, the search results are limited to the page size that you set. If the search results exceed the page size limit, the appliance displays an error message to inform you to refine your search criteria or to change the page size limit. In the Host Record editor, complete the information.

3. Save the configuration, and then click Restart if it appears at the top of the screen.

Converting Unmanaged Data

You can convert an unmanaged address to a host, an A or AAAA record, a PTR record, or a fixed address. To convert an unmanaged address:

1. In the IP Map or List panel, select an unmanaged address you want to convert, and then select Convert from the Toolbar.

2. In the drop-down list, select the type of address to which you want to convert the unmanaged address. For IPv4 addresses, you can select To Host, To A Record, To PTR Record, or To Fixed Address. For IPv6 addresses, you can select To Host, To AAAA, To PTR Record, or To IPv6 Fixed Address.
   Depending on the record type you select, Grid Manager displays the corresponding editor. It also populates the attributes of the unmanaged address in the editor. Enter the appropriate information in the editor.

3. Save the configuration, and then click Restart if it appears at the top of the screen.

The following are some conditions for a conversion:

• A and AAAA records: You must select a DNS zone when converting an unmanaged address to an A or AAAA record.

• PTR record: You must select a DNS zone when converting an unmanaged address to a PTR record.

• IPv4 and IPv6 Fixed Address: Grid Manager displays a confirmation dialog box to ensure that you want to create a fixed address for the unmanaged address.

• IPv4 and IPv6 Host record: You can use the unmanaged address to enable a host record for DNS or DHCP.

Clearing Unmanaged Data

Unmanaged objects are objects that are not configured for DNS or DHCP and do not have any corresponding NIOS objects such as fixed addresses, DNS records, or host records. You can clear unmanaged data if you do not want it to appear in the discovered data. Any unmanaged data that was discovered in a previous discovery can be removed. When you clear an unmanaged IP address, the status of the IP address changes to Unused.
Note that for cloud deployments, you can remove an unmanaged VM only when all the VM related properties are removed first. When the VM is removed, the tenant pointing to this VM will also be removed automatically. For information about cloud deployments, see Deploying Cloud Network Automation.
To clear unmanaged data, complete the following steps:

Method 1

1. For IP addresses: From the Data Management tab -> IPAM tab, select an unmanaged IP address in the IPMap or List panel.
   For networks: From the Data Management tab -> IPAM tab -> IPMap or List panel, select a network in which you want to clear all unmanaged addresses.
   For Cloud tenants: From the Cloud tab -> Tenants tab, select a tenant for which you want to clear unmanaged data.
   For Cloud VMs: From the Cloud tab -> VMs tab, select a VM for which you want to clear unmanaged data.

2. Click Clear -> Clear Unmanaged Data or Clear All Unmanaged Data from the Toolbar.

3. In the ClearUnmanagedData confirmation dialog box, click Yes. The appliance clears data that has no corresponding NIOS objects such as fixed addresses, DNS records, or host records.

Method 2

1. From the Cloud tab -> VM tab, select Discovery Manager from the Toolbar.

2. In the vDiscoveryJobManager dialog, click the Action icon 

   Open

   

    next to the selected vDiscovery job, and then select Clear Unmanaged Data.

3. In the ClearUnmanagedData confirmation dialog box, click Yes. The appliance clears data that has no corresponding NIOS objects such as fixed addresses, DNS records, or host records.

Resolving Conflicting Addresses

Conflicts happen when discovered data does not match existing IP address data. The IP Map panel and the Cloud tab
-> VMs tab display conflicting addresses with a red background. The IP List panel displays Conflict as the status for all conflicting addresses. For objects that have multiple conflicts, Grid Manager lists each of them in a bulleted list in the Resolve multiple conflicts dialog. You can select a conflict, in any order, to begin resolving each issue. After you resolve the selected issue, Grid Manager returns to the Resolve multiple conflicts dialog so you can resolve other issues.
Depending on the conflict, you can do one of the following to resolve it:

• For a DHCP lease conflict, you can clear the existing lease and create either a fixed address or a reservation for the IP address. You can also keep the existing data and clear the discovered data. For more information, see Resolving DHCP Lease Conflicts below.

• For a fixed address conflict, you can either keep the existing fixed address data or update the existing data with the discovered data. For more information, see Resolving Fixed Address Conflicts below.

• For a DHCP range conflict, you can create a fixed address, create a reservation, or clear the discovered data. For more information, see Resolving DHCP Range Conflicts below.

• For a host conflict, you can either keep the existing host record data or update the existing data with the discovered data. For more information, see Resolving Host Conflicts below.

• For a VM affiliation conflict, you can either update all the displayed objects to be affiliate with the discovered data or keep the current affiliation and clear the conflict. For more information, see Resolving VM Affiliation Conflicts below.

You must resolve conflicting addresses individually. You cannot resolve multiple conflicts at the same time.

To resolve a conflict:

1. In the IP Map or List panel, select a conflicting address, and then click Resolve Conflict from the Toolbar.

2. The Resolve Conflict dialog box displays the reason of the conflict and lists the existing information and discovered information of the address in the Description field. Depending on the type of conflict, the appliance displays the corresponding resolution options. You can compare the existing and discovered data and decide how you want to resolve the conflict.

Resolving DHCP Lease Conflicts

When an IP address has a DHCP lease and the discovered MAC address is in conflict with the existing MAC address, the IP address has a DHCP lease conflict.
To resolve a DHCP lease conflict, perform the following:

1. In the Resolve Conflict or Resolve multiple conflicts dialog, Grid Manager displays the nature of the conflict and the discovered data versus the current data. Select one of the following to resolve the conflict:

   • Clear lease and create fixed address from discovered data: Clears the existing DHCP lease and creates a fixed address with the discovered data. The Fixed Address editor appears with the discovered data populated.

   • Clear lease and create a reservation from discovered data: Clears the existing DHCP lease and creates a new reservation using the discovered data. The Reservation editor appears with the discovered data populated.
     This option does not apply to leases served by Microsoft DHCP servers because they do not support Infoblox reservations. 

   • Keep the existing and ignore this conflict: Keeps the current DHCP lease for the address and ignores the lease conflict.

2. Click OK or Resolve (when you have multiple conflicts). If you have multiple conflicts, Grid Manager returns to the Resolve multiple conflicts dialog so that you can resolve other conflicts.

Resolving Fixed Address Conflicts

When the discovered MAC address of an IPv4 address does not match with its existing MAC address, or when the DUID of an IPv6 address does not match with its existing DUID, the IP address has a fixed address conflict.
To resolve a fixed address conflict, perform the following:

1. In the Resolve Conflict or Resolve multiple conflicts dialog, Grid Manager displays the nature of the conflict and the discovered data versus the current data. Select one of the following to resolve the conflict:

   • Keep fixed address and clear discovered data: Keeps the existing fixed address and clears the discovered data.

   • Update fixed address with discovered data: Updates the existing fixed address data with the discovered data.

2. Click OK or Resolve (when you have multiple conflicts). If you have multiple conflicts, Grid Manager returns to the Resolve multiple conflicts dialog so that you can resolve other conflicts.

Resolving DHCP Range Conflicts

When an IP address is in a DHCP range and does not match an existing DHCP lease, fixed address, or exclusion range and it shows an active state during a discovery, the IP address has a DHCP range conflict.
To resolve a DHCP range conflict:

1. In the Resolve Conflict or Resolve multiple conflicts dialog, Grid Manager displays the nature of the conflict and the discovered data versus the current data. Select one of the following to resolve the conflict:

   • Create a fixed address: Creates a fixed address with the discovered data.
     If the fixed address is served by a Microsoft server, but is outside of a scope, you must then navigate to the Fixed Address editor and assign the fixed address to the appropriate Microsoft server.

   • Create a reservation: Creates a reservation with the discovered data. This creates an Infoblox reservation, and therefore cannot be used for IP addresses that are served by Microsoft servers. Note that you cannot convert an IPv6 address to a reservation.

   • Clear discovered data: Clears the discovered data and no object is created for the IP address.

2. Click OK or Resolve (when you have multiple conflicts). If you have multiple conflicts, Grid Manager returns to the Resolve multiple conflicts dialog so that you can resolve other conflicts.

Resolving Host Conflicts

When the MAC address of an IPv4 address that belongs to a host record does not match with its existing MAC address, or when the DUID of an IPv6 address that belongs to a host record does not match with its existing DUID, the IP address has a host conflict.

1. In the Resolve Conflict or Resolve multiple conflicts dialog, Grid Manager displays the nature of the conflict and the discovered data versus the current data. Select one of the following to resolve the conflict:

   • Keep host record and clear discovered data: Keeps the existing data and clears the discovered data.

   • Update host record with discovered data: Updates the existing host record data with the discovered data.

2. Click OK or Resolve (when you have multiple conflicts). If you have multiple conflicts, Grid Manager returns to the Resolve multiple conflicts dialog so that you can resolve other conflicts.

Resolving VM Affiliation Conflicts

When an IP address contains objects that are affiliated with a VM that is not the same as the discovered VM, this IP address has a VM affiliation conflict.
To resolve a VM affiliation conflict:

1. In the Resolve Conflict or Resolve multiple conflicts dialog, Grid Manager displays the nature of the conflict and the discovered affiliation versus the current affiliation. Select one of the following to resolve the conflict:

   • Update all the displayed objects to be affiliate to the discovered affiliation: Updates all associated objects in this IP address to affiliate with the discovered affiliation.

   • Keep the current affiliation(s) and clear the conflict: Keeps the existing data and clears the conflict.

2. Click OK or Resolve (when you have multiple conflicts). If you have multiple conflicts, Grid Manager returns to the Resolve multiple conflicts dialog so that you can resolve other conflicts.

Resolving MAC Address Conflicts

When the MAC address of an existing IP address does not match the MAC address of the discovered data, the object has a MAC address conflict.
To resolve a MAC address conflict:

1. In the Resolve Conflict or Resolve multiple conflicts dialog, Grid Manager displays the nature of the conflict and the discovered data versus the current data. Select one of the following to resolve the conflict:

   • Change the configured MAC address to be the same as the discovered MAC address: Changes the MAC address to the discovered MAC address.

   • Keep fixed address and ignore this conflict: Keeps the fixed address and ignores the discovered data.

2. Click OK or Resolve (when you have multiple conflicts). If you have multiple conflicts, Grid Manager returns to the Resolve multiple conflicts dialog so that you can resolve other conflicts.

Clearing Discovered Data

You can clear previously discovered managed data for selected IPv4 or IPv6 networks. This action is useful, for example, if your network topology has changed since the last discovery and you want to discover new data on the network or cloud platform. You may perform this action whether or not the network is in a managed or unmanaged state.

To clear discovered data:

1. In the IP Map or List panel, select a network, and then click Clear -> Clear Discovered Data from the Toolbar.

2. In the Clear Discovered Data dialog box, click Yes.

3. Navigate to the Data Management tab → DNS tab, delete all the associated zones.

4. After you clear all the discovered data, you should navigate to the Data Management tab and clear all the associated networks.

You can also clear discovered data on all networks in a network view by performing the following steps:

1. In the IP Map or List panel, select a network, and then click Clear -> Clear Discovered Data from the Toolbar.

2. In the Clear Discovered Data dialog box, click Yes.

3. Navigate to the Data Management tab → DNS tab, delete all the associated zones.

4. After you clear all the discovered data, you should navigate to the Data Management tab and clear all the associated networks.

You can also clear discovered data for a specific discovery job, as follows:

1. From the Cloud tab -> VM tab, select DiscoveryManager from the Toolbar.

2. In the vDiscoveryJobManager dialog, click the Action icon 

   Open

   

    next to the selected vDiscovery job, and then select ClearDiscoveredData.

3. In the ClearDiscoveredData dialog box, click Yes. The appliance clears all the discovered managed data that is collected by the specified vDiscovery job.

4. Navigate to the Data Management tab → DNS tab, and then delete all the associated zones.

5. After you clear all the discovered data, you should navigate to the Data Management tab and clear all the associated networks.

Clearing All Discovery Data

You can clear all the discovered data, whether managed or unmanaged, for a specific vDiscovery job. This action removes only the discovered data, not the associated NIOS objects, collected by the specified vDiscovery job only. It does not remove any discovered data collected through Network Insight or other non vDiscovery tasks.

To clear all discovered data for a specific vDiscovery job, perform the following:

1. From the Cloud tab -> VM tab, select Discovery Manager from the Toolbar.

2. In the vDiscoveryJobManager dialog, click the Action icon 

    next to the selected vDiscovery job, and then select Clear All Discovery Data.

3. In the ClearDiscoveredData dialog box, click Yes. The appliance clears all the discovered managed and unmanaged data that is discovered by the specified vDiscovery job.