You can assign a VLAN object to different networks. You can also assign multiple VLAN objects to a single network. You can also assign multiple networks to a single VLAN. Once a VLAN object is assigned to a network, the status of VLAN object changes from Unassigned or Reserved to Assigned. For information about the types of VLAN status, see Configuring VLANs.

Assigning a VLAN object enables you to compare an assigned VLAN object with the VLAN objects discovered by Network Insight. You can then generate inventory and conflict reports based on this data.

You can also create smart folders and obtain a list of networks by the assigned VLAN ID or name.

Note

You can assign VLAN objects only to IPv4 or IPv6 networks.
You cannot assign VLAN objects to a network container.
If a VLAN object is assigned to a network, you cannot convert that network into a network container.
You cannot split or join a network that has VLAN objects assigned to it.

Viewing VLAN Objects Assigned to a Network

You can view the VLAN objects assigned to a network on the IPAM tab or the DHCP tab. The Assigned VLAN ID and Assigned VLAN Name columns display the VLAN ID and name of the assigned object. If multiple VLANs are assigned to a network, Multiple is displayed in the Assigned VLAN ID and Assigned VLAN Name columns. You can then compare it to the data in the Discovered VLAN ID and Discovered VLAN Name columns and view conflicts if any.

Adding VLAN Objects to a Network

To add or assign a VLAN object to a network, perform the following steps:

From the Data Management tab, select the IPAM tab or DHCP tab -> network checkbox of the network to which you want to assign the VLAN object.
Select the Action icon and then click Edit.
Click VLAN Assignment. A list of all the VLAN objects associated with the network is displayed.
Click the Add icon.
From the VLAN Parent Type drop-down list, select the parent type of the VLAN object that you want to add. The parent type can either be a VLAN view or a VLAN range. For more information, see Configuring VLANs.
From the VLAN Parent field, select the VLAN view or VLAN range that the VLAN object belongs to.
From the VLAN Name field, select the VLAN object. Alternatively, click Next Available VLAN if you want NIOS to assign a VLAN object. NIOS searches for a VLAN object with the lowest ID in the specified VLAN view or range. VLAN objects whose status is Assigned or Reserved are ignored. However, you can still select a reserved or assigned VLAN object by clicking the VLAN Name field and selecting the VLAN object. The VLAN ID field is populated with the ID of the selected VLAN object.
Click Add to add the VLAN objects The table is populated with the VLAN object details.
You can click the Add icon to add more VLAN objects.
Click Save & Close.

You can also assign a VLAN object when creating an IPv4 or IPv6 network. For more information, see Configuring IPv4 Networks and Managing IPv6 Networks.

Editing Assigned VLAN Objects

To edit a VLAN object that is already assigned, perform the following steps:

From the Data Management tab, select the IPAM tab or DHCP tab -> network checkbox of the network that you want to edit.
Select the Action icon and then click Edit.
Click the VLAN Assignment tab.
Select the VLAN object that you want to edit and click the Edit icon. Details of the VLAN object are displayed. You can edit and select another VLAN object in another VLAN view for example.
Click Save & Close.

Deleting Assigned VLAN Objects

You cannot delete a VLAN object that is assigned to a network. You must first unassign the VLAN object and then delete it. Deleting an unassigned VLAN object from the list of VLAN objects that are assigned to a network does not delete it from NIOS. Also, you cannot delete a network, network view, or a parent network container that have VLAN objects assigned to them.

To unassign a VLAN object, perform the following steps:

From the Data Management tab, select the IPAM tab or DHCP tab -> network checkbox of the network that you want to edit.
Select the Action icon and then click Delete.
Click the VLAN Assignment tab.
Select the VLAN object that you want to edit and click the Delete icon. The VLAN object is deleted from the assignment.
Click Save & Close.

Browser not supported