The set auto_provision command enables and disables auto-provisioning for the NIOS appliance. You cannot enable auto-provisioning for an appliance if a static IP address is already set for an appliance. Note that
auto-provisioning can be enabled only on single appliances. To view the status of auto-provisioning for a NIOS appliance, see show auto_provision.

Syntax

set auto_provision {on | off}

Argument	Description
on	Enables auto-provisioning on an appliance.
off	Disables auto-provisioning on an appliance.

Examples

Turn on auto-provisioning on an appliance

Infoblox > set auto_provision on

Turn off auto-provisioning on an appliance

Infoblox > set auto_provision off

Browser not supported