The show ospf command displays configuration and statistical information about the OSPF protocol that is running on the NIOS appliance. For information on how to change your OSPF settings, see set ospf.

Syntax

show ospf {route | interface | database | neighbor | configuration}

The show ospf command displays information about the OSPF configuration on the appliance, reachability information about neighbors, and OSPF routes to destinations. You can specify the command with or without arguments.

Argument	Description
`route`	Displays the OSPF routing table, as determined by the most recent SPF calculation.
`interface`	Displays the state and configuration on all interfaces configured with OSPF.
`database`	Displays all OSPF database information.
`neighbor`	Displays the OSPF neighbor information.
`configuration`	Displays the running OSPF configuration file.

Examples

Infoblox > show ospf interface
eth0 is down
OSPF not enabled on this interface eth1 is up
Internet Address 172.32.0.61/24, Broadcast 172.32.0.255, Area 0.0.0.0 Router ID 172.32.0.61, Network Type BROADCAST, Cost: 100
Transmit Delay is 1 sec, State DROther, Priority 0
Designated Router (ID) 172.32.0.110, Interface Address 172.32.0.254 No backup designated router on this network
Timer intervals configured, Hello 10, Dead 40, Wait 3, Retransmit 5    Hello due in 00:00:01
Neighbor Count is 1, Adjacent neighbor count is 1 lo is up
Internet Address 172.16.10.10/32, Area 0.0.0.0
Router ID 172.32.0.61, Network Type LOOPBACK, Cost: 100 Transmit Delay is 1 sec, State Loopback, Priority 0
No designated router on this network
No backup designated router on this network
Timer intervals configured, Hello 10, Dead 40, Wait 3, Retransmit 5    Hello due in inactive
Neighbor Count is 0, Adjacent neighbor count is 0
Infoblox > show ospf route
============ OSPF network routing table ============ N 172.16.10.10/32   [100] area: 0.0.0.0                    directly attached to lo N 172.32.0.0/24     [100] area: 0.0.0.0                    directly attached to eth1

============ OSPF router routing table =============
============ OSPF external routing table ===========

Browser not supported