Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

You can manually control the frequency of discovery polling of switched Ethernet networks. To fully discover them, you must define these settings. NetMRI's Switch Port Manager feature governs how L2 and L2/L3 Ethernet switching devices are polled for discovery and data collection. To enable automatic polling through ARP for switched devices (network devices that belong to the Switching and Switch-Router device groups), perform the following:

  1. Click the Settings icon > Setup > Collection and Groups > Switch Port Management side tab.
  2. Set the Periodic Polling time interval. This defines the ARP polling interval for repeated data collection. The default value is 1 Hour.
  3. To open the Advanced Settings page, click the Settings icon > General Settings > Advanced Settings > Discovery group > Poll ARP with SPM, and then choose the True option. The setting is set to False by default.

Note

For more details on switch port management settings, see Global Switch Port Management Polling Settings.

  • No labels