The Topology Viewer (Network Explorer > Topology) enables you to visualize the network in a graph from the following viewpoints:

Aggregate Network Topology: This shows the general Layer 2 paths of the network. For more information, see Aggregate Network Topology.
L2 nHop Network Topology: This shows the Layer 2 switching paths of the network. For more information, see L2 nHop Network Topology.
L3 nHop Network Topology: This shows the Layer 3 switching/routing paths of the network. For more information, see L3 nHop Network Topology.
L2/L3 Most Likely Path Network: This indicates the spanning tree paths preferred by switched network traffic in the network. For more information, see L2_L3 Most Likely Path Network Topology.
L3 Most Likely Path Network Topology: This indicates the routed paths preferred by most packet flows in the network. For more information, see L3 Most Likely Path Network Topology.
VLAN Network Topology: This maps the paths of VLANs throughout the network. For more information, see VLAN Network Topology.

To learn how to work with the topology graph in the Topology Viewer, see the following sections:

Note

For optimum performance during interactive editing of large network graphs, it is recommended to enable hardware acceleration in the browser. It is also beneficial to make sure the client device’s GPU drivers are up-to-date, as this will often increase performance within the viewer.

Browser not supported