Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

The show tcp_timestamps command shows whether TCP timestamps are enabled or disabled. If timestamps are enabled, you can view them in the traffic capture file. 

Typically, you run the show tcp_timestamps command before running the set tcp_timestamps command to determine the status of the TCP timestamps. Based on the status (enabled or disabled), you can run set tcp_timestamps to enable or disable the timestamps. 

Syntax

show tcp_timestamps

Example

When TCP timestamps are enabled:

Infoblox > show tcp_timestamps
TCP timestamps are enabled.

When TCP timestamps are disabled:

Infoblox > show tcp_timestamps
TCP timestamps are disabled.
  • No labels