Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

System specifications describe the physical characteristics of the BloxOne B1-105 appliance. Environmental specifications describe the temperature and moisture limits. Power specifications describe the electrical range within which the appliance circuitry can operate.

Caution

Infoblox recommends provisioning power according to the power specifications listed below.

System Specifications

  • Form Factor: Compact and Fanless
  • Dimensions: 198 mm x 42 mm x 145 mm (7.8” x 1.65” x 5.7”)
  • Weight: Approximately 1.2 kg (
  • Ethernet Ports: Dual Gigabit LAN1 and LAN2 ports
  • Serial Port: Dual RS-232/422/485 Serial ports
  • USB Port: 1x USB 3.0 and 2x USB 2.0 ports
  • Safety: FCC, CE, TUV, CB, VCCI, C-Tick, KCC, CCC, NOM, BIS, EAC

Environmental Specifications

  • Operating Temperature: 41 F to 95 F (5 C to 35 C)
  • Storage Temperature: -4 F to 158 F (-20 C to 70 C)
  • Operating Relative Humidity: 0% to 90% (non-condensing)
  • Airflow CFM (Cubic Feet/Minute): 81 CFM
  • Airflow Direction: Front-to-Back
  • Environmental Certification: WEEE and RoHS

Power Specifications

  • Input Voltage: 12V
  • U.S/Europe: 100 to 240 VAC switchable, 50 to 60 Hz
  • Output Power: 36 watts
  • AC Power Supply: 100 to 240VAC 600W (Maximum)
    • Rated Input Frequency: 50 to 60 Hz
    • Rated Input Current: 7.5A at 100VAC, 3.5A at 240VAC
    • Inrush Current: <25 A max at 240VAC
    • Maximum Heat Output (BTU/hour): 2355 Maximum
    • Power Factor: 0.98 at 100VAC/60Hz, 0.94 at 230VAC / 50Hz
  • DC Power Supply: -48V 600W GRND TERM, RING, VIN 12-10 AWG #10
    • Rated Input Voltage: -48VDC
    • Rated Input Current: 18A max @ -44VDC, 10A max @ -65VDC
    • Maximum Inrush Current: <20A
    • Maximum Heat Output (BTU/hour): 2355 Maximum

DC Power Cable Color Codes

DC power cables ship with a label describing each lead. Each label is located near the pigtail leads. The following table lists -48V DC power specifications. Note that no color coding standards exist for DC power connections. The color coding used by the external DC power source at your site determines the color coding for the leads on the power cables that attach to the terminal studs on each DC power supply.

48V DC Power Connector

Cable Pin

Cable Color

Description

1

Black

Positive Return

2

Red

Negative Input Voltage

3

Green/Yellow

Safety Ground

  • No labels