Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Current »

You can define the default SNMP settings that are used by NetMRI. To configure SNMP settings for the appliance, complete the following:

  1. Go to the Settings icon > General Settings > Security page and click the SNMP Settings tab.
  2. Enable or disable Version 1/2c. If enabled, enter a Community String.
  3. Enable or disable Version 3. If enabled, enter an SNMPv3 Passphrase.
  4. Click Update.
  • No labels