Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Configuring the RADIUS Service requires knowledge of the following key values:

  • The Infoblox Vendor ID, 7779.

  • The specific Vendor Attribute, 10.

  • The IP address of the RADIUS server.

  • The shared secret for authenticating the NetMRI appliance on the RADIUS server.

  • The port number. Normally, you will retain the default value of 1812.

  • The names of the remote groups on the RADIUS server containing the users intended to log in to the NetMRI appliance.

To configure a RADIUS authentication service for NetMRI, perform the following:

  1. Go to the Settings icon > General Settings section > Authentication Services page.

  2. Click New to add a new authentication service. The Add Authentication Service dialog opens.

  3. Enter the Name and Description.

  4. Set the Priority and Timeout of the new RADIUS service.

  5. Choose RADIUS as the Service Type. The Service Specific Information pane updates to show the required RADIUS settings.

  6. Retain the defaults for the Infoblox Vendor ID (set to 7779) and the Vendor Attribute ID (set to 10). These values are required for operation with any RADIUS server. These values may be set differently but must also be defined in the RADIUS dictionary file.

  • No labels