Infoblox 2200 Series Appliance Specifications

This chapter provides physical, environmental and power specifications for the Infoblox 2200 Series of network service appliances, including the Trinzic TE-2210 and TE-2220 appliances, the Trinzic Reporting TR-2200, the Network Insight ND-2200 and the Infoblox Advanced Appliance PT-4000 and PT-4000-10G.
System specifications describe physical characteristics of the appliances. Environmental specifications describe appliance temperature and moisture limits. Power specifications describe the electrical range within which the appliance circuitry can operate.
Consult the respective sections below for specifications for your specific appliance:

The Appliance Specifications chapter reports power usage and heat generation characteristics against each hardware configuration sold under the base model number. Optional hardware configurations that affect electrical power budgets include the following:

Use of a single power-supply or 1+1 redundant PSU (power supply unit) configuration (see Infoblox 2200 Series Appliance Rear Panel).
1 GbE SFP network interface card (see SFP/SFP+ Interface Support).
10 GbE SFP+ network interface card (see SFP/SFP+ Interface Support).

Some appliance models do not support optional configurations, due to factory configurations for specific network applications. The Infoblox PT-2200 is an example (for information, see Infoblox PT-2200 Specifications).
You may choose to order a field-replaceable power supply to upgrade your appliance to a 1+1 redundant configuration. Doing so changes the power usage and heat generation characteristics for your appliance. The same is true if you change out your AC power supply configuration for DC power supplies. Consult the specifications for your appliance for both AC and DC information.

Note: All AC and DC power and heat specifications provide a tolerance of +15% (all reported values are 15% above factory-measured values).