Versions Compared

Version Old Version 40 New Version 41
Changes made by

Gary Leicht

Gary Leicht

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Log in to the Workspace ONE UEM console.

  2. Navigate to Apps & Books > Applications > Native > Public.

  3. Click + Add Application.

  4. For the platform, select Apple iOS as the platform and search for Infoblox EP.

  5. Search for Infoblox EP, and then click Next.

    Searching for Infoblox Endpoint for Apple iOS application within Workspace One UEM.

  6. When the Infoblox EP app appears in the search results, Select when the app appears in the search results

  7. Click Save and Assign.

  8. In the app assignment window, configure the details and select the appropriate App Delivery Method.

  9. In the Application Configuration tab, toggle the Send Configuration switch to ON.

  10. Upload the app-config file downloaded from the Infoblox Portal.

  11. Click UPLOAD XML, and select the file.

  12. Modify userId and groupName parameters if required.

    The file displayed with its associated userID and groupName in themobility management (EMM) system.

  13. Click Create, then Save.

    Image Modified

  14. Click Publish to assign the app configuration to devices.

    Image Modified


    The assignment will be pushed to the device. If it is not pushed in the same screen, then select Devices > select the device > Install.

    Image Modified


    After a few minutes, the endpoint will be automatically installed on the client devices.

  15. Open the Infoblox Endpoint app on the iOS device. After a few seconds, the app will display its protected status.

    Image Modified

For Android Devices

  1. Log in to the Workspace ONE UEM console.

  2. Navigate to Apps & Books > Applications > Native > Public.

  3. Click + Add Application.

    The Workspace One UEM console showing how to add an application for Android.

  4.  For the platform, select Android as the platform and search for BloxOne EP.

  5. Search for BloxOne EP, then click Next.

  6. Click Approve > Select.

  7. Click Save > Assign.

  8. In the app assignment window, configure the details and select the appropriate App Delivery Method.

  9. In the Application Configuration tab, toggle the Send Configuration switch to ON.

    1-6.PNG

  10. In the information fields, enter the configuration data from the app-config file downloaded from the Infoblox Portal.

  11. Click Create, then click Save.

  12. Click Publish to push the assignment to devices.


    After a few minutes, the endpoint will automatically install on client devices. If it is not pushed in the same screen, then it can be pushed from Devices > (select the device) > Install.

    The pushed assignment as located in the Devices tab.

  13. Open the Infoblox Endpoint app from the work profile on the Android device. Accept the VPN acknowledgment.

  14. After a few seconds, the app will be in a protected state.

Important Notes

  • Authorization Changes:

    • Infoblox Endpoint iOS version 2.0.7 and above and Android version 1.0.10 and above use joinToken instead of customerId for authorization.

    • Infoblox Endpoint Android version 1.0.9 and below requires the customerId attribute value in the app configuration.

    • Older app versions will automatically update to the latest version, while new installations require updating the joinToken in the app configuration.

    • For existing devices with older version of the app, the update to latest version is automatic. For fresh installations on new devices, the joinToken should be updated in the app configuration settings.

    • Maintain both customerId and joinToken during the transition period until all devices are updated to 1.0.10 or above.

  • Proxy Settings:

    • The extensionType parameter for iOS devices defaults to "vpn." Change it to "dnsproxy" to intercept DNS traffic via the DNS Proxy Provider.