Content Comparison

...

1. Log in to the Cloud Services Portal.
2. Click Manage -> On-Prem Hosts.
3. On the On-Prem Hosts page, select the on-prem host you want to configure.
4. Click the On-Prem Hosts drop-down menu, and then select Local Access to enable local access to the B1-212 appliance.
   
5. In the Enable Local Access dialog, complete the following:
   • Username: Enter the login user name for the B1-212 appliance.
   • Password: Enter the last eight digits of the serial number for the B1-212 appliance.

6. Click Enable. Local access to the appliance is granted for two hours.
   

   Note
   title Note
   Enabling local access to the B1-212 appliance allows you to reset the on-prem host using the Device UI.

   
   

7. Log in to the Device UI. For information about the Device UI, see Troubleshooting Hosts.
   
8. Click Administration -> Reset Host from the left pane menu.
9. On the Administration page, click Reset for Factory Reset.
10. In the Confirm your action dialog, complete the following:
    • Enter your password: Enter the last eight-digit serial number of your B1-212 appliance.
11. Click Confirm to proceed with the factory reset.
12. Once the reset process is complete, you can set up and reconfigure the appliance, as described in /wiki/spaces/InfrastructureDRAFT/pages/343539815Deploying the B1-212 Physical Server.