...
- From the Cloud Services Portal, click Manage > Anycast.
- Click on Create Anycast Configuration to open the Create Anycast Config page.
- In the Create Anycast Config dialog, complete the following:
- Anycast IP Name: Enter the name of the anycast configuration.
- Anycast IPv4 Address: Add Enter the Anycast IP address to the Anycast IP Address fieldIPv4 address. Up to two IPv4 IP addresses may be added when setting up Anycastanycast. Anycast supports the following IP addresses for BloxOne Threat Defense: 52.119.40.100 and 103.80.5.100. For BloxOne DDI, the administrator is required to specify the IP address as required. Name
- Anycast IPv6 Address: Add the name of the Anycast configuration in the Name field. Enter the anycast IPv6 address.
- Description: Add Enter the description of the Anycast anycast configuration in the Description field.
- Service: From the Select Service drop-down menulist, choose the service to be used for with the Anycast anycast configuration.
- In Expand the Tags section , and add tags for this Anycast configuration, so you can use the tags with hostsanycast configuration. For more information, see Managing Tags.
- In the On-Prem HostsExpand the Service Instances section, click click Add and complete the following:
- NAME: Click Select List and choose a host from the drop-down list. IP ADDRESS: With the selection of a host, the associated IP address of the host will populate in the IP ADDRESS field.
Click Add again if you want to add multiple hosts.
- NAME: Click Select List and choose a host from the drop-down list. IP ADDRESS: With the selection of a host, the associated IP address of the host will populate in the IP ADDRESS field.
- Click Save & Close to save the updated configuration.