Creating Anycast Configuration

To create an anycast configuration profile, complete the following:

1. From the Infoblox Portal, click Configure > Networking > Anycast.
2. Click Create Anycast Configuration.
3. In the Create Anycast Config dialog, complete the following:
   • Name: Enter the name of the anycast configuration.
   • Anycast IPv4 Address: Enter the anycast IPv4 address. Up to two IPv4 IP addresses may be added when setting up anycast. 
   • Anycast IPv6 Address: Enter the anycast IPv6 address.
   • Description: Enter the description of the anycast configuration.
   • Service: From the drop-down, select the service for which you want to configure anycast. For example, if you want to configure anycast for DNS, select DNS from the list.
   • Expand the Tags section and add tags for this anycast configuration. For more information, see Managing Tags.
   • Expand the Service Instances section, click Add and complete the following:
     • NAME: Click Select List and choose the anycast service instance you have previously configured. This is optional.
       
4. Click Save & Close to save the anycast configuration.
5. After you have created an anycast configuration profile, you can proceed to create an anycast service instance. For information, see Creating Anycast Services.