Versions Compared

Version Old Version 1 New Version 2
Changes made by

Viktoryia Varapayeva (Deactivated)

Viktoryia Varapayeva (Deactivated)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Note
titleNote

When importing credentials on an Operations Center, if no collector is specified in the import file, the credentials will be applied to all collectors.


SNMPv1/2 and SNMPv3 Credentials
SNMP Credentials<community string>
SNMP Vendor Defaults<community string> <tab> <vendor name>
SNMPv3 noAuthNoPriv credentials<snmpv3 user>
SNMPv3 authNoPriv credentials

<snmpv3 user> <tab> <auth protocol> <tab> <auth password>.

The authentication protocol is md5 or sha.
SNMPv3 AuthPriv Credentials

<snmpv3 user> <tab> <auth protocol> <tab> <auth password> <tab> <priv protocol><tab> <privacy password

<priv protocol> is 3des, aes, or des
CLI Credentials
<username> <tab> <password><username> can be empty for a line password credential.
ENABLE <tab> <password>Used for privileged mode passwords.
<username>For username-only scenarios.
<tab> <password>For password-only scenarios.
CLI Vendor Default Credentials

<username> <tab> <password> <tab> <vendor>

<Username> can be empty for a line password credential.

<Password> can be empty.

ENABLE <tab> <password> <tab> <vendor>Used for privileged mode passwords.