Versions Compared

Version Old Version 5 New Version Current
Changes made by

Gary Leicht

Gary Leicht

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Connect the appliance to a network by using an Ethernet cable. For information about cabling the appliance to a network, refer to Cabling the Appliance to a Network.
  2. Connect the appliance to a power source and turn on the power. For information about powering the appliance, refer to Powering the Appliance. The appliance automatically sends a lease request to the DHCP server, which assigns a DHCP lease and a dynamic IP address to the appliance. The DHCP client tries to send the lease request for a duration of one minute and if the request fails, the default IP address (192.168.1.2) is assigned to the appliance.
  3. Join the appliance to the Grid Master. For information about joining an appliance to the Grid Master, refer to the NIOS Administrator Guide.

...