Versions Compared

Version Old Version 41 New Version Current
Changes made by

Gary Leicht

Gary Leicht

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

This guide outlines the steps to install and configure Infoblox Mobile Endpoint (EP) for iOS and Android devices using VMware Workspace ONE UEM. Follow the steps below to ensure seamless deployment and provisioning of the Mobile Endpoint application.

Important Notes

  • Authorization Changes:

    • Infoblox Endpoint iOS version 2.0.7 and above and Android version 1.0.10 and above use joinToken instead of customerId for authorization.

    • Infoblox Endpoint Android version 1.0.9 and below requires the customerId attribute value in the app configuration.

    • Older app versions will automatically update to the latest version, while new installations require updating the joinToken in the app configuration.

    • For existing devices with older version of the app, the update to latest version is automatic. For fresh installations on new devices, the joinToken should be updated in the app configuration settings.

    • Maintain both customerId and joinToken during the transition period until all devices are updated to 1.0.10 or above.

  • Proxy Settings:

    • The extensionType parameter for iOS devices defaults to "vpn." Change it to "dnsproxy" to intercept DNS traffic via the DNS Proxy Provider.

Step 1: Download the MDM Config File from the Infoblox Portal

...

  1. Log in to the Workspace ONE UEM console.

  2. Navigate to Apps & Books > Applications > Native > Public.

  3. Click + Add Application.

    The Workspace One UEM console showing how to add an application for Android.

  4.  For the platform, select Android as the platform and search for BloxOne EP.

  5. Search for BloxOne EP, then click Next.

  6. Click Approve > Select.

  7. Click Save > Assign.

  8. In the app assignment window, configure the details and select the appropriate App Delivery Method.

  9. In the Application Configuration tab, toggle the Send Configuration switch to ON.

    1-6.PNG

  10. In the information fields, enter the configuration data from the app-config file downloaded from the Infoblox Portal.

  11. Click Create, then click Save.

  12. Click Publish to push the assignment to devices.


    After a few minutes, the endpoint will automatically install on client devices. If it is not pushed in the same screen, then it can be pushed from Devices > (select the device) > Install.

    The pushed assignment as located in the Devices tab.

  13. Open the Infoblox Endpoint app from the work profile on the Android device. Accept the VPN acknowledgment.

  14. After a few seconds, the app will be in a protected state.

Important Notes

...

Authorization Changes:

  • Infoblox Endpoint iOS version 2.0.7 and above and Android version 1.0.10 and above use joinToken instead of customerId for authorization.

  • Infoblox Endpoint Android version 1.0.9 and below requires the customerId attribute value in the app configuration.

  • Older app versions will automatically update to the latest version, while new installations require updating the joinToken in the app configuration.

  • For existing devices with older version of the app, the update to latest version is automatic. For fresh installations on new devices, the joinToken should be updated in the app configuration settings.

  • Maintain both customerId and joinToken during the transition period until all devices are updated to 1.0.10 or above.

Proxy Settings:

...