Page Comparison

To create an Anycast anycast configuration profile, complete the following:

1. From the Cloud Services the Infoblox Portal, click Manage -> Configure > Networking > Anycast.
2. Click on Create Anycast Configurationto open the Create Anycast Config page.
3. In the Create Anycast Config dialog, complete the following:
   Anycast IP
   • • Name: Enter the name of the anycast configuration.
     • Anycast IPv4 Address:
   Add
   • • Enter the
   Anycast IP address to the Anycast IP Address field
   • • anycast IPv4 address. Up to two IPv4 IP addresses may be added when setting up
   Anycast. Anycast supports the following IP addresses: 52.119.40.100 and 103.80.5.100.
   • Name: Add the name of the Anycast configuration in the Name field. 
   Description: Add
   • • anycast. 
     • Anycast IPv6 Address: Enter the anycast IPv6 address.
     • Description: Enter the description of the
   Anycast
   • • anycast configuration
   in the Description field
   • • .
     • Service: From the
   Select Service
   • • drop-down
   menu
   • • ,
   choose the service to be used for the Anycast configuration.In the Tags section,
   • • select the service for which you want to configure anycast. For example, if you want to configure anycast for DNS, select DNS from the list.
     • Expand the Tags section and add tags for this
   Anycast configuration, so you can use the tags with on-prem hosts
   • • anycast configuration. For more information, see Managing Tags.
   In the On-Prem Hosts
   • • Expand the Service Instances section,
    click
   • • click Add and complete the following:
       • NAME: Click Select List and choose
   an on-prem host from the drop-down list. 
   • IP ADDRESS: With the selection of an on-prem host, the associated IP address of the on-prem host will populate in the IP ADDRESS field.
     Click Add again if you want to add multiple on-prem hosts.

...

1. • • the anycast service instance you have previously configured. This is optional.
       
2. Click Save & Close to save the

...

1. anycast configuration.
2. After you have created an anycast configuration profile, you can proceed to create an anycast service instance. For information, see Creating Anycast Services.