Navigate to Configure > Service Deployment > As-a-Service. By default, All is highlighted and Location is selected.
The following information is shown:
Service Capabilities: Shows the number of Locations per configuration profile for the capabilities deployed across all services.
Service Status: The Health card shows service(s) having issues with count and its age.The Configuration Changes card shows all services changed and the time since the change was made.
Service Insights: Shows the following metrics:
Availability: It is a capability wise bar chart represents consolidated availability of All services. You can filter the data for 1 day, 2 days, 1 week, 2 weeks and 1 month.
Status: shows total number of services deployed and count based on the following statuses
Available
Unavailable
Degraded
Locations: It represents the distribution of All services among Service Locations
Click the <Service_Name> under All.
The following information is shown:
Service Capabilities: Shows capabilities deployed for the selected service, associated configuration profile, and the service status.
Service Status: Shows the following information:
The Health card shows all locations that are a part of the service, its tunnel status, and the age of this status.
The Configuration Changes card shows changes the selected service has undergone and the time since the change was made.
Service Insights: Shows the following metrics:
Availability: It is a capability-wise bar chart of the selected service availability. You can filter the data for 1 day, 2 days, 1 week, 2 weeks, and 1 month.
Traffic: shows QPS/LPS rate for the last 24 hours.
Locations: It represents the distribution of Access Locations
Click the <Country> under <Service_Name>.
The following information is shown:
Service Capabilities: Shows the capabilities deployed for the selected service, the associated configuration profile, and the service status.
Service Status: Shows the following information:
The Health card shows all locations that are a part of the selected country, its tunnel status and the age of this status.
The Configuration Changes card shows changes the selected country has undergone and the time since the change was made.
Service Insights: Shows the following metrics:
Availability: It is a capability-wise bar chart of the selected service availability. You can filter the data for 1 day, 2 days, 1 week, 2 weeks, and 1 month.
Click the <Access_Location_Name> under <Country>.
The <Access_Location_Name> is the name of the site. The following information is shown:
Service Capabilities: Shows capabilities deployed for the selected service, associated configuration profile, and the service status.
Service Deployment <Service_Deployment_Name>: The following information is shown:
Type: This is the type of service deployment.
Service Location: This is an Infoblox-managed cloud region.
Cloud Service IP: Public IP of the Infoblox-managed cloud region. It shows two IPs for high availability.
Identity: Its a key to be used as LEFT ID in IPsec Tunnel configuration on your Internet facing gateway (Router/Firewall).
Service IP: This is the IP address configured on all the devices in your network
Credential: This is the name of the pre-shared key configured.
Location Status: The following information is shown:
Status: This is the current status of the your IPsec tunnel.
Type: This is the type of site.
WAN IP Addressed: This is a public IP of your Internet facing gateway (Router/Firewall)
Last Update: The time since the last change on the IPSec tunnel status.
Configuration Changes: The edits to the access location and the time since the edit was done.
Service Insights: Shows the following metrics:
Availability: It is a capability-wise bar chart of the selected service availability. You can filter the data for 1 day, 2 days, 1 week, 2 weeks, and 1 month.
Connection Availability: shows the tunnel status percentage and its trend for the last 24 hours.