/
Location
Document toolboxDocument toolbox

Location

Owned by Sri Raghu
Last updated: Jan 16, 2025
3 min read

Navigate to Configure > Service Deployment > As-a-Service. By default, All is highlighted and Location is selected.

The following information is shown:

  • Service Capabilities: Shows the number of Locations per configuration profile for the capabilities deployed across all services.

  • Service Status: The Health card shows service(s) having issues with count and its age.The Configuration Changes card shows all services changed and the time since the change was made.

  • Service Insights: Shows the following metrics:

    • Availability: It is a capability wise bar chart represents consolidated availability of All services. You can filter the data for 1 day, 2 days, 1 week, 2 weeks and 1 month.

    • Status: shows total number of services deployed and count based on the following statuses

      • Available

      • Unavailable

      • Degraded

    • Locations: It represents the distribution of All services among Service Locations

Click the <Service_Name> under All.

The following information is shown:

  • Service Capabilities: Shows capabilities deployed for the selected service, associated configuration profile, and the service status.

  • Service Status: Shows the following information:

    • The Health card shows all locations that are a part of the service, its tunnel status, and the age of this status.

    • The Configuration Changes card shows changes the selected service has undergone and the time since the change was made.

    • Service Insights: Shows the following metrics:

      • Availability: It is a capability-wise bar chart of the selected service availability. You can filter the data for 1 day, 2 days, 1 week, 2 weeks, and 1 month.

      • Traffic: shows QPS/LPS rate for the last 24 hours.

      • Locations: It represents the distribution of Access Locations

Click the <Country> under <Service_Name>.

The following information is shown:

  • Service Capabilities: Shows the capabilities deployed for the selected service, the associated configuration profile, and the service status.

  • Service Status: Shows the following information:

    • The Health card shows all locations that are a part of the selected country, its tunnel status and the age of this status.

    • The Configuration Changes card shows changes the selected country has undergone and the time since the change was made.

  • Service Insights: Shows the following metrics:

    • Availability: It is a capability-wise bar chart of the selected service availability. You can filter the data for 1 day, 2 days, 1 week, 2 weeks, and 1 month.

Click the <Access_Location_Name> under <Country>.

The <Access_Location_Name> is the name of the site. The following information is shown:

  • Service Capabilities: Shows capabilities deployed for the selected service, associated configuration profile, and the service status.

  • Service Deployment <Service_Deployment_Name>: The following information is shown:

    • Type: This is the type of service deployment.

    • Service Location: This is an Infoblox-managed cloud region.

    • Cloud Service IP: Public IP of the Infoblox-managed cloud region. It shows two IPs for high availability.

    • Identity: Its a key to be used as LEFT ID in IPsec Tunnel configuration on your Internet facing gateway (Router/Firewall).

    • Service IP: This is the IP address configured on all the devices in your network

    • Credential: This is the name of the pre-shared key configured.

  • Location Status: The following information is shown:

    • Status: This is the current status of the your IPsec tunnel. For more information, see Tunnel Service Status.

    • Type: This is the type of site.

    • WAN IP Addressed: This is a public IP of your Internet facing gateway (Router/Firewall)

    • Last Update: The time since the last change on the IPSec tunnel status.

  • Configuration Changes: The edits to the access location and the time since the edit was done.

  • Service Insights: Shows the following metrics:

    • Availability: It is a capability-wise bar chart of the selected service availability. You can filter the data for 1 day, 2 days, 1 week, 2 weeks, and 1 month.

    • Connection Availability: shows the tunnel status percentage and its trend for the last 24 hours.