debug command
- Viktoryia Varapayeva (Deactivated)
Owned by Viktoryia Varapayeva (Deactivated)
The debug command enables debug level logs from NetMRI services to be displayed and compiled into a text file.
Note
Do not run the debug command from your system without instructions from Infoblox Support.
Syntax
To enable or disable debugging, run the following command:
debug <service> enable|disable
To view a list of services or devices for which debugging is or can be enabled, run the following command:
debug show-active|debug show-valid
The following table describes the subcommands of the debug command.
| Subcommand | Description |
|---|---|
enable | Enables debugging for the service. |
disable | Disables debugging for the service. |
| Displays the services or devices with enabled debugging. |
| Displays the services for which debugging can be enabled. |