The setup command enables the configuration of the management port (MGMT) IP address, IP subnet mask, default gateway, and DNS servers. Other critical settings include the network name (for the network over which NetMRI will collect data), the local Domain Name, the NTP time server, and the time zone.

Syntax

The following is the command syntax:

setup

Example

navm193 > setup

This option allows you to configure system settings such as IP address,
subnet mask, default gateway, and DNS servers.
 
Do you want to start system setup now? (y/n) [n]: y
 
Default values, when available, are given within [].
You may clear defaults by typing a SPACE and pressing Enter.
 
+++ Configuring Network Identification Settings
Database Name is a descriptive name for this deployment. It is used in reports titles, headers, etc.
Recommended: Begin name with uppercase letter.
 
Database Name [corp100]:
 
The Server Name identifies this system in SNMP and HTTPS server certificates.
The installed HTTPS certificate contains the following subject:
subject= /CN=rgrace-dev/O=Network Automation
 
Server Name [corp100-dev]:
 
Do you want to generate a new HTTPS Certificate? (y/n) [n]:
Domain Names are used to truncate device names in NetMRI tables and reports.
Recommended: specify local domain name(s).
 
Domain Name 1 (e.g., example.com) [west.corp100.local]:
Domain Name 2 (optional) [east.corp100.local]:
 
Time Servers are used to synchronize time with reliable time sources.
Recommended: use a local ntp server if available.
 
Time Zone Regions
Choose your local region.
 
0. Africa 1. Antarctica 2. Arctic 3. Asia
4. Atlantic 5. Australia 6. Brazil 7. Canada
8. CET 9. Chile 10. EET 11. GMT
12. GMT-1 13. GMT+1 14. GMT-2 15. GMT+2
16. GMT-3 17. GMT+3 18. GMT-4 19. GMT+4
20. GMT-5 21. GMT+5 22. GMT-6 23. GMT+6
24. GMT-7 25. GMT+7 26. GMT-8 27. GMT+8
28. GMT-9 29. GMT+9 30. GMT-10 31. GMT+10
32. GMT-11 33. GMT+11 34. GMT-12 35. GMT+12
36. Europe 37. Hongkong 38. Iceland 39. Indian
40. Israel 41. Mexico 42. NZ 43. NZ-CHAT
44. Pacific 45. US 46. UTC 47. WET
 
Enter choice (0-47) [45]:
+++ Configuring Management Port Settings
You must configure an IPv4 or IPv6 address/mask on the management port.
NetMRI can perform analysis from the management port or a separate scan port.
 
IP Address (optional):
Subnet Mask (optional):
IPv6 Address (optional):
IPv6 Prefix (optional):
...

You can also configure the SCAN port for the appliance. No network view configuration is defined during setup.