Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

The cac command allows the configuration of the OCSP authentication service.

Syntax

The following is the command syntax:

cac status|enable|disable|ocsp-enable|ocsp-disable

The following table describes the subcommands of the cac command.

SubcommandDescription
statusPrints out the CAC status: Certificate authentication, OCSP, Configured CA.
enableEnables the certificate validity check.
disableDisables the certificate validity check.
ocsp-enableEnables the certificate revocation check.
ocsp-disableDisables the certificate revocation check.
  • No labels