Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Use the connect command to connect to the command-line interface of a discovered device using the internal functionality of NetMRI.

Syntax

The following is the command syntax:

connect <host> [network view]

Example

rgrace64-212.inca.infoblox.com> connect device1-name "Network 1"
Connecting to device1-name on Network 1 network ...
+++ Determining source address ......................................... OK
+++ Determining device credentials ..................................... FAILED

Username: username

username@10.10.10.10's password:


device1-name#
device1-name# exit
rgrace64-212.inca.infoblox.com>

  • No labels