Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

The show ipv6_neighbor command displays the status, IPv6 address and link-local address (normally, the MAC address of the neighboring port) of the IPv6 neighbor for the specified NIOS appliance interface–LAN, LAN2 or MGMT.

Syntax

show ipv6_neighbor <lan|lan2|mgmt>

If no applicable information is available (for example, the current device has no IPv6 configuration and hence no IPv6 neighbor information), you are returned to the NIOS CLI prompt.

Example

Infoblox > show ipv6_neighbor lan
fe80::204:96ff:fe1d:1980 lladdr 00:04:96:1d:19:80 router STALE

  • No labels