Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Version History

Version 1 Current »

The set lom command configures the LOM (Lights Out Management) settings for the IPMI interface. To view the current network settings for the IPMI interface, use the show lom command.

Syntax

set lom

This command has no arguments.

Example

Infoblox > set lom
Enter LOM IP address: 10.1.1.22
Enter LOM netmask: 255.255.255.0
Enter gateway address [Default: 10.34.10.1]:
LOM network settings:

IP address: 10.34.10.42
Netmask:255.255.255.0
Gateway address: 10.34.10.1

Is this correct? (y or n): y
Are you sure? (y or n): y

  • No labels