Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Version History

« Previous Version 2 Next »

he show lom command displays the LOM (Lights Out Management) settings for the IPMI interface. To configure the network settings for the IPMI interface, use the set lom command.

Syntax

show lom

This command has no arguments.

Example

Infoblox > show lom
LOM for Grid: enabled
LOM for member: enabled (inherit)

Network settings:
IP Address: 10.34.10.42
Subnet Mask: 255.255.255.0 Default Gateway IP: 10.34.10.1

Users:

  • No labels