The show bgp command displays information about the BGP configuration on the appliance, reachability information about neighbors, and BGP routes to destinations. You can specify the command with or without an argument. A command without an argument defaults to show bgp route.
For information about how to write statistical information to syslog, see set bgp log.
Syntax
show bgp {route | neighbor | summary | config}
| Argument | Description |
|---|---|
| route | Displays the BGP routing table. |
| summary | Displays the BGP protocol summary. |
| neighbor | Displays information about all known BGP neighbors. |
| config | Displays the running BGP configuration file. |
Example
The following examples are for illustration only. The actual output varies based on the Quagga version.
Infoblox > show bgp route BGP table version is 0, local router ID is 50.0.1.2 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale, R Removed Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
* i 10.0.1.0/24 10.0.1.1 0 100 0 ?
*> 10.0.2.99 11 32768 ?
* i 10.0.2.0/24 10.0.1.99 2 100 0 ?
*> 0.0.0.0 1 32768 ?
* i 50.0.1.1/32 10.0.1.1 0 100 0 i
*> 10.0.2.99 1011 32768 ?
* 50.0.1.2/32 0.0.0.0 1 32768 ?
*> 0.0.0.0 0 32768 i
...
Infoblox > show bgp summary BGP router identifier 50.0.1.2, local AS number 65001 RIB entries 25, using 1600 bytes of memory Peers 2, using 5024 bytes of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
10.0.1.1 4 65001 89 85 0 0 0 01:11:27 10
100.0.2.4 4 65004 57 53 0 0 0 00:46:37 5
Total number of neighbors 2