AAAA Record

Use the nios_aaaa_record module to create, update, or remove an AAAA record object from a NIOS Grid.

The following table describes the parameters you can define in the nios_aaaa_record module:

Parameter	Required/Optional	Description
`name`	Required	Specifies the fully qualified host name to add or remove from NIOS.
`view`	Optional	Specifies the DNS view to associate the AAAA record with. If a value is not specified, the default view configured in NIOS is used.
`ipv6addr`	Required	Specifies the IPv6 address for the AAAA record.
`ttl`	Optional	Specifies the Time To Live (TTL) value for the record. The duration that the record is valid for, in seconds (cached). Zero indicates that the record should not be cached.
`extattrs`	Optional	Specifies the extensible attributes for the A record object.
`state`	Optional	Specifies the state of the AAAA record instance on the NIOS server. Set one of the following values: `present` (default): Configures the record. `absent`: Removes the record.
`comment`	Optional	Describes the AAAA record object.
`provider`	Required	Defines the details of the connection: `host`: DNS host name or IP address to connect to the remote instance of NIOS. `username`: User name to use for authenticating the connection to the remote instance. `password`: Password to use for authenticating the connection to the remote instance. For information on additional fields you can define, see the list of subparameters.
`connection`	Required	The `nios_aaaa_record` module must be run locally.

Examples

name: configure an AAAA record
infoblox.nios_modules.nios_aaaa_record:
name: aaaa.ansibletestzone.com
ipv6: 2001:0db8:85a3:0000:0000:8a2e:0370:7334
state: present
provider:
host: <nios_hostname_or_hostip>
username: <nios_username>
password: <nios_password>
connection: local

name: update an AAAA record name
infoblox.nios_modules.nios_aaaa_record:
name: {new_name: aaaa_new.ansibletestzone.com, old_name: aaaa.ansibletestzone.com}
ipv6: 2001:0db8:85a3:0000:0000:8a2e:0370:7334
comment: this is a test comment
state: present
provider:
host: <nios_hostname_or_hostip>
username: <nios_username>
password: <nios_password>
connection: local