SFP/SFP+ Interfaces Support Summary
- Shwetha S (Deactivated)
- Panna .
Infoblox offers an optional variant of the TE-2306 that comes with a four-port network line card that supports both 1GbE and 10GbE transceivers. You may mix media types in the set of ports (example, two 10GbE transceivers for LAN1 and HA, one 1GbE fiber transceiver for LAN2 and one copper transceiver for MGMT). This variant disables all four RJ-45 network ports. Infoblox hardware cannot be adapted or modified after shipping so if fiber transceivers and/or 10GbE speed is needed, this optional variant must be specified at the time of order.
Infoblox 2306 Series Model | SFP/SFP+ Support | # of active SFP/SFP+ ports | 10GbE Support | HA | Disabled internal RJ-45 ports |
|---|---|---|---|---|---|
TE-2306 | Y1 | 4 | Y | Y | Y |
1 – With optional 1GbE or 10GbE line card. Disables internal RJ-45 ports.
The following table lists the Ethernet SFP transceivers that are compatible with Infoblox Ethernet SFP/SFP+ interfaces and basic guidelines for compatibility.
Transceivers for 1GbE SFP and 10GbE SFP+ Support on the TE-2306 appliance
Field-Replaceable Unit | Part Number | Type | TE-1506 | TE-1606 | TE-2306 | TE-4106 |
|---|---|---|---|---|---|---|
Infoblox SFP+ Long Range 10GbE LR fiber Transceiver | IB-SFPPLUS-LR | FRU only | Y | Y | Y | Y |
Infoblox SFP+ Short Range 10GbE SR fiber Transceiver | IB-SFPPLUS-SR | FRU only | Y | Y | Y | Y |
Infoblox SFP 1GbE SX Fiber | IB-SFP-SX | FRU only | Y | Y | Y | Y |
Infoblox SFP 1GbE Copper Interface Transceiver | IB-SFP-CO | FRU only | Y | Y | Y | Y |
Finisar SFP 1GbE LR Fiber Single-Mode Transceiver | Finisar FTLF1318P3BTL | Not sold by Infoblox. Contact your distributor for availability | Y | Y | Y | Y |
Cisco SFP+ 10GbE Copper Direct Attach (10GSFP+Cu) Cable | Cisco SFP-H10GB-CU5M | Not sold by Infoblox. Contact your distributor for availability | Y | Y | Y | Y |
HP SFP+ 10GbE Copper Direct Attach (10GSFP+Cu) Cable | HPJ9283B | Not sold by Infoblox. Contact your distributor for availability | Y | Y | Y | Y |