Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

To edit traffic flows for the Data Connector traffic flows, complete the following:

  1. Log in to the Cloud Services Portal.
  2. Click Manage -> Data Connector.
  3. Select the Traffic Flows Configuration tab and select the traffic flow configuration to be edited. Click Edit.
  4. In the Edit Traffic Flow Configuration wizard, complete the following edits as required:
    • Name: Enter the name of the source. Select a name that best describes the source, so that you can distinguish this from other sources.
    • Description: Enter the description of the source. The field length is 256 characters.
    • State: Use the slider to enable or disable the source configuration. Note that the source configuration is in effect only when you enable it. If you disable the source configuration, you will not be able to select this source when you create a traffic flow.
    • Expand the Source Data Type section, and select the source data you want the Data Connector to collect from this source.
    • In the CDC Enabled Host section, complete the following:
      • On-Prem Host: Select an on-prem host from among the option list of on-prem hosts.
    • In the SELECT CONFIGURATION section, complete the following:
      • From the Source Configuration options, select a source.
      • From the Destination Configuration options, select a destination,
    • In the ETL Configuration section, complete the following:
      • Click Add to add an ETL configuration. Click Remove to delete a traffic flow configuration.

5. Click Save & Close to save the newly updated configuration.


For more information on configuring traffic flows, see the following:

  • No labels