Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Version History

Version 1 Next »

This section explains how to upgrade Infoblox IPAM Plug-In for VMware in vRealize Orchestrator.

Note

Procedure detailed in this topic may vary depending on the version of vRA that you are using. For version-specific instructions, refer to the VMware documentation links listed in the Resources section.

To upgrade Infoblox IPAM Plug-In for VMware:

  1. Log in to the vRealize Orchestrator Control Center.
  2. Click Plug-Ins –> Manage Plug-Ins.
  3. Deselect the Infoblox IPAM Plug-in checkbox and click Save changes.
  4. On the Startup Options page, click Restart and wait until the current status becomes “RUNNING”.
  5. Click Manage Plug-Ins.
  6. In the Manage Plug-Ins page, click Browse.
  7. In the file upload dialog, select the .dar file (o11nplugin-ipam.dar) for the plug-in, and click Open.
  8. Click Install, and then click Install again to confirm. The newer version of the Infoblox IPAM Plug-In overwrites the existing plug-in.
  9. If the Infoblox IPAM checkbox is not selected in the Enable plug-in column, select it and click Save Changes.
  10. On the Startup Options page, click Restart and wait until the current status becomes “RUNNING”.
  • No labels