The show ssl_tls_ciphers command shows the SSL/TLS ciphers that are enabled for the NIOS appliance. You can use the set ssl_tls_ciphers command to enable or disable the cipher suites. For information, see set ssl_tls_ciphers.

Syntax

show ssl_tls_ciphers

This command has no arguments.

Example

Infoblox > show ssl_tls_ciphers

1. TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256   enabled

2. TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384   enabled

3. TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA      enabled

4. TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA      enabled

5. TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256   enabled

6. TLS_DHE_RSA_WITH_AES_128_GCM_SHA256     enabled

7. TLS_DHE_RSA_WITH_AES_256_GCM_SHA384     enabled

8. TLS_DHE_RSA_WITH_AES_128_CBC_SHA        enabled

9. TLS_DHE_RSA_WITH_AES_256_CBC_SHA        enabled

10. TLS_DHE_RSA_WITH_AES_128_CBC_SHA256     enabled

11. TLS_DHE_RSA_WITH_AES_256_CBC_SHA256     enabled

12. TLS_RSA_WITH_AES_128_GCM_SHA256         enabled

13. TLS_RSA_WITH_AES_128_CBC_SHA            enabled

14. TLS_RSA_WITH_AES_128_CBC_SHA256         enabled

15. TLS_RSA_WITH_3DES_EDE_CBC_SHA           enabled

16. TLS_RSA_WITH_AES_256_GCM_SHA384         enabled

17. TLS_RSA_WITH_AES_256_CBC_SHA            enabled

18. TLS_RSA_WITH_AES_256_CBC_SHA256         enabled

19. TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 enabled

20. TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 enabled
TLS_DHE_DSS_WITH_AES_256_CBC_SHA        disabled
TLS_DH_RSA_WITH_3DES_EDE_CBC_SHA        disabled
TLS_DH_DSS_WITH_3DES_EDE_CBC_SHA        disabled
TLS_DHE_DSS_WITH_AES_128_CBC_SHA        disabled
TLS_RSA_WITH_RC4_128_SHA                disabled
TLS_DHE_DSS_WITH_AES_256_GCM_SHA384     disabled
TLS_DHE_DSS_WITH_AES_256_CBC_SHA256     disabled
TLS_DHE_DSS_WITH_AES_128_GCM_SHA256     disabled
TLS_DHE_DSS_WITH_AES_128_CBC_SHA256     disabled