Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Use the set hardware-type command for IB-FLEX only. This command enables you to set a supported virtual appliance as an IB-FLEX. For more information, see About IB-FLEX.

To see if an appliance has been configured as an IB-FLEX, you can use the show hardware-type command.

Syntax

set hardware-type

This command has no arguments.

Example

When setting a supported virtual appliance as an IB-FLEX:
Infoblox > set hardware-type IB-FLEX

  • No labels